Latest News
As more and more 75 series ESCs have been launching with different specifications and firmwares, some customers are confused or may be do some incorrect steps during parameters setting process. This article will focus on what you should pay attention to when doing...
Continue reading
This time we will use VESC firmware 6.02 to set the parameters for FSESC 75200 Pro which is built with bluetooth module and TFT Screen for E-scooter. Items: FSESC 75200 Pro with Alu. PCB - https://rb.gy/eq5gqTFT Screen Ver2 with GPS - https://shorturl.at/mrwFZTips...
Continue reading
Items: Flipsky 75100 75V 100A Single ESC Throttle Accelerator Bar Brake Handle Simple forward / reverse switch (for demonstration purposes) Adapter wire (for GND connection) GND wire*2pcs ADC mode Reverse and Cruise Mode wiring diagram: 1. After the motor FOC settings,...
Continue reading
The default maximum voltage of vesc_tool is 72v. So, if your battery voltage is over 72V. What should you do? Here belows FYI. 1.Click “Welcome&Wizards”--“AutoConnect” 2.Click “Firmware”--”Bootloader”. Do firmware Bootloader 3.Firmware reflash and upload after bootloader done, choose 75_300_R2 and the VESC_default_no_hw_limits.bin 4....
Continue reading
As we have released three different 75 series fsescs, some customers are asked what's the difference performance between them. The follows are summerized: 75100 75200 7550 ESC size 85*50.7*33.8mm 110*73*34mm 78*59*32.5mm Voltage 14～84V（4～20S） 14～75V（3～16S） 14～75V（3～16S） Continuous Current 100A 200A 50A...
Continue reading
