Latest News
Identification of Firmware Anomaly: When the firmware name displayed for the FT85BS and the FT85BS V2.0 ESCs is "FT85BD" (as shown in Figure 1), a firmware anomaly is confirmed. Solution: Use the Flipsky ESC Tool(Specified version1.6) to re-flash the firmware for the FT85BS and...
Continue reading
What is a UBEC? UBEC, which stands for "Universal Battery Eliminator Circuit." The name might sound a bit peculiar; it originates from the early days of the RC (Radio Control) hobby. At that time, the receiver and servos required a...
Continue reading
What is Regenerative Braking? Simply put, regenerative braking is a technology that recovers the kinetic energy generated during braking—energy that would otherwise be wasted—converts it into electrical energy, and stores it back in the battery. This technology is increasingly important...
Continue reading
The MiniV6 MK5 is developed based on the VESC_6_MK5, incorporating a phase filtering circuit for more accurate rotor position information at low speeds. It integrates an intelligent switch function, supporting manual power on/off, roll start, automatic shutdown, and LED status...
Continue reading
Wirings diagram: Remove some capacitors and resistors as below:1) Remove the hall sensor 10nF filter capacitor on H1(A),H2(B),H3(C)2) Replace the 2.2KΩ resistors to be 0Ω resistors on the H1 (A), H2 (B),and H3 (C) Wiring1.Connect the FSESC75200Pro V2.0(75200) with the...
Continue reading
