Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
Automotive grade monitoring & balancing IC with separate power supply for increased reliability
Voltages measurements for load, charger & battery pack
Bi-directional current monitoring
SOC based on coulomb counting
Humidity sensor & board temperature monitoring
Charger detection circuit
Integrated precharge circuit
Power button, USB-C, UART, I2C & isolated CAN bus interface
On board High-Efficiency 3.3V regulator powered from the main battery pack
High current capacity automotive grade screw connectors for main power connections
Buzzer & status LED
Support overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
Support almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.
Mini Portable DIY Spot Welder Rechargeable Color Screen Display DIY Battery Pack Welding FS-SW2
-13 in stock
Recommended nickel strips: 0.1-0.2mm
Menu display: 1.8 inch color LCD
Working mode: automatic/manual
Built-in battery: 10000mAh
Shell material: aluminum alloy
Thickness of soldering pen wire: 8AWG
Cycle charging: support
Protection reminder: support
Firmware upgrade: support
Automatic shutdown: support
Power display: support
Temperature detection: support
Electric Skateboard T Tool Black
-118 in stock
This is a skate tool with a hidden hex/phillips-head screwdriver built inside. You can tighten up any loose parts or fix your skateboard on-the-go!
Includes: T tool comes with a hex head in 3 sizes: H9.5, H13, or H14.
SQ-A110 110W Electric Solder Iron Intelligent Constant Temperature 100-500°C/212-932°F Antistatic
19 in stock
Temperature range: 100-500 ° C (212-932 ° F)
Power supply: 220V 50Hz / 110V 60Hz
Grounding impedance of welding nozzle: < 2 Ω
Ground voltage of welding nozzle: < 2mv
Dimension (about): 236mm (length) x 23.6mm (maximum diameter) / 9.29in (length) x 0.93in (maximum diameter)
The advantage of the SQ-A110
Small size, three key design, powerful function.
Fast temperature recovery, heating speed 8 seconds.
High quality heating body, high platinum temperature sensitivity.
Two display temperature modes (Celsius, Fahrenheit).
With sleep function to save energy and LED indicate sleep state.
Microcomputer temperature compensation value, temperature error less than plus or minus 5 degrees.
High insulation, soft touch power cord.
Digital display, clear content at a glance.
Memory mode function.
Handle is made of special high temperature resistant material and ESD anti-static treatment.
Equipped with black diamond solder tip, it has strong tin loading capacity and fast heat transfer speed.
Reminder: It is a normal phenomenon that the first use of Electric Soldering Iron may cause smoke,because there flux at the heat of the electric soldering iron .the first use will smoke,not a quality problem.
1 x SQ-A110 Intelligent constant temperature electric soldering iron
(optional 220v European and 110v American plugs)
1 x Instructions
1 x Thick large 900M-T-K
1 x Metal soldering frame
SQ-D60 MINI Electric Soldering Iron|12-24V Digital Display Portable Intelligent Constant Temperature
12 in stock
SQ-D60A (Note: LED version, below referred to as “A version”)
SQ-D60B(Note: Digital tube version, below referred to as “B version”)
Temperature stability range: ± 5 ℃
Power supply: DC12-24V ,Type-C interface
A version: 280 ℃, 350 ℃ ,400 ℃（choices）
B version: 100-400 ℃ (Adjustable)
Operating voltage Power The fastest time to heat up
12V 17W 100s
16V 30W 40s
19V 40W 22s
24V 60W 13s
The Advantage of SQ-D60A/SQ-D60B
The SQ-D60 is equipped with a SQ-001 soldering iron head and uses TYPE-C power supply, “A section” LED display and “B section” digital tube display.
SQ-D60 with humanized functions such as automatic sleep shutdown, induction wake-up, etc., it is a portable intelligent constant temperature electric soldering iron.
The operation is simple and easy, the temperature rises quickly and stably, and the round and small body is full of simplicity and luxury. It is an essential welding tool for electronic players.
SQ-D60 adopts integrated TYPE-C power supply interface. The circuit design is stable and safe. The built-in STM32 processor, dual temperature sensor and motion sensor are the perfect combination to make SQ-D60 freely switch between various temperature ranges. Wake-up, over-temperature and high-pressure alarm, etc., truly realize intelligent intelligent constant temperature electric iron.
SQ-D60 Comparison of soldering iron differences
default 10 min (no adjustable)
Please use proper power supply and accessories to ensure safe use.
Before replacing the soldering iron head, you must cut off the power.
Do not touch the tip of the soldering iron after the temperature has risen to avoid burns.
The electric soldering iron is used for the first time. It may be slightly smoked due to the heating of the heating element. This is normal.
1 x Mainframe
1 x Soldering Iron Tip (K)
1 x Conversion Line
1 x Instruction Manual
1 x Soldering Iron Stand
1 x Hex Key
1 x XT60 Power Cable
Accelerator Throttle Pedal Assembly Speed Control Brake Foot Pedal for E-Bike