Spec:

• Max power : 1300W
• Motor KV:200KV
• Max Current: 36A
• Voltage:3-12S
• Rated torque:0.6N.M
• Max torque : 1.1N.M
• Internal resistance: 115mΩ
• Motor structure: 12N/14P
• Diameter *Length (mm): 50*48
• Shaft (mm): 8mm D-shaft
• Bullet Connector: MT30
• Sensor: Yes

5048 Motor Drawing:

Spec:

• Rated power : 2200W
• Max power : 4200W
• Motor KV:110KV
• Max Current: 100A
• Voltage:6-18S
• Max torque : 9.5 N.M
• Weight:1.08KG
• Internal resistance: 0.055ohm
• Motor structure: 12N/14P
• Diameter *Length (mm): 70*70
• Shaft (mm): 10mm/D-Shaft/Round Shaft
• Bullet Connector: 4mm
• Sensor: Yes

10MM D Shaft Motor Drawings：

10MM Round Shaft Motor Drawings：

Spec:

• Max power : 1800W
• Motor KV:200KV
• Max Current: 38A
• Voltage:6-12S
• Max torque : 1.7 N.M
• Weight:0.5KG
• Number of slots & poles: 12N/14P
• Diameter *Length (mm): 49*63.5
• Shaft (mm): 8mm/D-Shaft
• Bullet Connector: MT30mm*16AWG
• Sensor: Yes

Diagram:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Spec:

• Weight: 0.84KG
• Max Power: 2700W
• Motor KV: 190
• Max current: 75A
• Battery type: 4-14S
• Recommend ESC: VESC6
• Max Torque: 7.5Nm
• Diameter(mm): 63
• Length(mm): 68
• Total length (mm):92mm
• Shaft(mm): 10mm Dshaft
• Bullet connector: 4mm

Wire configuration:

• Blue = U
• White = V
• Yellow = W
• BLDC Motor
• The number of pole: 14

Detail:

Drawing:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Spec:

• Weight: 1.4KG
• Max Power: 5500W
• Motor KV: 190/170/140KV
• Max. current: 100A
• Battery type: 4-14S (4-12S is safe for 190KV)
• Recommend ESC: VESC6
• Max Torque: 10Nm (in a very short time, no more than 30S)
• Diameter(mm): 63
• Length(mm): 100
• Total length (mm):130mm(including 8mm round shaft) / 125mm(including 10mm D shaft)
• Shaft(mm): 8mm/10mm
• Bullet connector: 4mm
• Hall sensor connector: 6-pin JST-PH
• High efficiency within 8000rpm, no more than 10000rpm 

Detail:

10MM D Shaft Motor Drawings：

8MM Round Shaft Motor Drawings：

10MM Round Shaft Motor Drawings：

Reference video:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Product Spec:

• Max Power: 4000 Watts
• Max Current: 95 Amps
• Max Volts: 4-14S 
• Max Torque: 9Nm
• Motor Resistance: 0.05Ohm
• Recommend ESC:VESC4&VESC6(3-12S )
• Weight: 1100g
• The motor length:84mm
• The motor diameter: 63mm
• Shaft Diameter 8mm, 30mm length
• Motor Wire:  12AWG wire with 4.0mm Gold Bullet Connector Male.customizable 5.5mm gold plated connector
  • Wire configuration:
    • Blue = A
    • Black = B
    • Yellow = C
• Stator: 0.2mm thickness lamination japan steel
• Magnet: N42SH high temp curve magnet
• BLDC Motor
• The number of pole: 14

More Detail:

8MM Round Shaft Drawing:

10MM Round Shaft Drawing:

10MM D-shaft Drawing:

Reference Video:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Feature:

• KV: 140/190KV
• Max Power: 3500Watts
• Max Current: 85 Amps
• Volts: 4-14S
• Max Torque: 8Nm
• Motor Resistance: 0.05Ohm
• Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
• The number of pole: 14
• Net weight: 980g
• Motor wire:12AWG
• Shaft size : 8mm/10mm

Reference Information:

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
• Screws to mount the motor are not included with the motor.
• If you choose round shaft motor, shipping includes the key for the keyway
  
• If you choose the shipping comes with pulley, will come with 8mm steel material pulley.
• The Flipsky logo is in different places, will be shipped randomly.

  
  

More details:

8MM Round Shape Shaft Drawing（108mm length）: 

10MM D-Shape Shaft Drawing(99 mm length）: 

Reference Video:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Specs:

• Max Power: 2450 Watts
• Max Current: 65 Amps
• Volts: 4-14S 
• Max Torque: 7Nm
• Motor Resistance: 0.053Ohm 
• Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
• Weight: 1.23 lb / 0.56 kg
• The motor length:54mm
• The motor diameter: 63mm
• Shaft diameter: 10mm D Shaft ,24mm length/8mm Round-short shaft,24mm length/8mm Round-long shaft,30mm length
• Motor Wire: 320mm silicone 12AWG wire with 4.0mm Gold Bullet Connector Male.
  • Wire configuration:
    • Blue = A
    • Black = B
    • Yellow = C 
• BLDC Motor
• The number of pole: 14

Reference Information:

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
• Screws to mount the motor are not included with the motor.

Difference Long Shaft and Short shaft ：

More Detail:

6354 10MM D Shaft Motor Drawing:

6354 8MM Round-Short Shaft Motor Drawing:

6354 8MM Round-Long Shaft Motor Drawing:

Product Spec

• Max Power: 7000Watts
• Max Current: 148Amps
• Max Volts: 14S 
• Max Torque: 17Nm
• The number of pole:14 / 7 pairs
• Recommend ESC: 6-14S 200A
• Weight: 3.96 lb / 1.82kg
• The motor length:107mm
• The motor diameter:80mm
• SHAFT: Diameter 12mm
• Thread size of shaft: M12
• Sensor: yes
• Max RPM: 8500 rpm (not to exceed 9500 rpm)

Diagram:

Product Spec:

• Max Power: 4000 Watts
• Max Current: 95 Amps
• Max Volts: 4-13S 
• Max Torque: 9Nm
• Motor Resistance: 0.05Ohm
• Recommend ESC:VESC4&VESC6(3-13S )
• Weight: 1000g
• The motor length:84mm
• The motor diameter: 63mm
• Shaft Diameter 8mm/10mm, 30mm length(8mm ), 25mm length(10mm),3x3x14mm keyway slot.
• Motor Wire:  12AWG wire with 4.0mm Gold Bullet Connector Male.customizable 5.5mm gold plated connector
  • Wire configuration:
    • Blue = A
    • Black = B
    • Yellow = C
• Stator: 0.2mm thickness lamination japan steel
• Magnet: N42SH high temp curve magnet
• BLDC Motor
• The number of pole: 14

Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm/2mm pitch

• Internal PCB with 120 Degree Hall Effect Sensors.
• Motor can be used with or without a sensor. Sensorless operation is most common.
• VESC Sensor Wires required to use with VESC.

What's Our Product Feature?

• Stator: Lamination Japan steel
• 12awg high strand silicone wire with 4.0mm gold bullet connectors.
• Both support sensor and sensorless mode! 

The 6384 motor 8mm shaft come with 8mm motor pulley is 20mm width, 10mm shaft come with 10mm motor pulley is 17mm width:

8mm shaft diagram:

 10mm shaft diagram:

Remark: This product will not come with cable . 

Features:

• Type: Underwater Propeller Motor
•  Motor dimension: 50*85mm
• Waterproof level:IP28 grade waterproof
• Poles：28（please write 14 pairs when do setup)
• Max torque:1.5NM
• Weight:1.51b/0.68kg

Rerference information:

Features:

• Waterproof level:IP28 grade,it can work underwater.
• Material :316 stainless steel shaft

Spec:

• Maximum power:410W
• Motor diameter: 46mm
• Motor length: 50mm
• Mounting distance: 28mm
• Shaft diameter: 4.85mm
• Poles：28（please write 14 pairs when do setup)
• Torque: 0.9N.m
• Prop mounting distance: 25mm
• Weight:310g

What is the advantage of F4125：

1. Anti-corrosion, can be used in sea water.
2. IP28 grade waterproof, It can work underwater.

H5065 Motor Spec:

SHAFT: Diameter 8mm （Recommended: Flipsky 8mm D-shape motor pulley）

Torque:1.2NM

Shipping Package:

1*H5065 motor

1* free vesc sensor wire

H5065 Motor Outline Drawing:

Spec:

• Max Power: 3250 Watts
• Max Current: 85 Amps
• Max Volts: 12S 
• Max Torque: 8Nm
• Motor Resistance: 0.05Ohm
• Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
• Weight: 1.9 lb / 0.86 kg
• The motor length:74mm
• The motor diameter: 63mm
• SHAFT: Diameter 8mm, 32mm length, 3x3x20mm keyway slot.
• Motor Wire: 130mm silicone 12AWG wire with 4.0mm Gold Bullet Connector Male.
  • Wire configuration:
    • Blue = A
    • Black = B
    • Yellow = C
• Stator: 0.2mm thickness lamination japan steel
• Magnet: N42SH high temp curve magnet
• BLDC Motor
• The number of pole: 14

Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch

• Internal PCB with 120 Degree Hall Effect Sensors.
• Motor can be used with or without a sensor. Sensorless operation is most common.
• VESC Sensor Wires required to use with VESC.

Shipping

• 6374 190KV EPOWER Motor (Fits 63mm Motor Mount)
• If you choose with motor pulley, will ship steel material

What's Our Product Feature?

• Stator: Lamination Japan steel
• 12awg high strand silicone wire with 4.0mm gold bullet connectors.
• Both support sensor and sensorless mode! 

Reference Information

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
•  Screws to mount the motor are not included with the motor.
• The key for keyawy is included with motors for shipping
• The mechanical diagram:

Product Spec:

• Max Power: 1550 Watts
• Max Current: 80 Amps
• No-load Current: 1A 10V
• Max Volts: 41.5V
• Lipo: 3S-8S (11.1V-29.6V)
• Max Torque: 4Nm
• Motor Resistance: 64mΩ
• Weight: 0.99 lb / 0.45 kg
• The motor length:65mm
• The motor diameter: 50mm
• SHAFT: Diameter 8mm, 20mm length, 3x3x15mm keyway slot.
• Motor Wire: 160mm silicone 16AWG wire with 4.0mm Gold Bullet Connector Male.
  • Wire configuration:
    • Blue（Heat shrinkable film） = A
    • Black （Heat shrinkable film）= B
    • Yellow （Heat shrinkable film）= C
• Brushless Motor
• The number of pole: 14

Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch

• Internal PCB with 120 Degree Hall Effect Sensors.
• Motor can be used with or without a sensor. Sensorless operation is most common.
• VESC Sensor Wires required to use with VESC.
• Wire configuration:
  • Red = 5v
  • Blue = A
  • Yellow = C
  • Green = B
  • Black = GND
  • White=Temp

What's Our Product Features:

• Stator: Lamination Japan steel
• 16awg high strand silicone wire with 4.0mm gold bullet connectors.
• Both support sensor and sensorless mode! 

•  5065 270KV EPOWER Motor (Fits 50mm Motor Mount)
• If you choose motor with pulley, it comes randomly black one or white one

Reference Information:

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts. 
•  Screws to mount the motor are not included with the motor.
• The key for keyawy is not included with motors for shipping