Skip to content
Firmware & software repositories are available click here:Github page.
Spec:
- Cell voltage operating range:2V-5V
- Recommended series cell:6S-12S
- Charge / discharge voltage:24V-52V
- Charge Current：≤20A
- Abs. Max battery voltage: 60V
- Minimum operating voltage: 14V
- Continuous charging current: 20A
- Over charge detect and release voltage: 2V-5V
- Over charge protection delay: ≥4ms
- Discharge current: ≤70A
- Max. Continuous discharge / regen current: 70A
- Over discharge detect / release voltage: 0-5V
- Over current detect delay:≥4ms
- Discharge over current protection release condition: off load
- Short Circuit detect voltage:short circuit of external load
- Short Circuit detect delay: 320us
- Short Circuit protection release: off load
- Battery pack capacity and internal resistance detection: Yes
- Balance current: 86mA @4.2V
- Temp Protect: -20℃—+120℃
- Working Temp Range:-20℃—+80℃
- Storage Temp Range: -20℃—+100℃
- Working current: ≤40mA
- Sleeping current: ≤100uA
- Size: 89 x 40 x 20.8mm
- Net weight: 106.5g
- Packing size: 140 x110 x 50 mm
- Package weight: 303.5g
- Including outer carton size: 170*120*100mm
- Weight with outer carton: 380g
Feature:
- Compact layout and mini
- Using aluminum alloy material shell, better heat dissipation.
- Automotive grade design, automotive grade locking connector.
- Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
- Automotive grade monitoring & balancing IC with separate power supply for increased reliability
- Voltages measurements for load, charger & battery pack
- Bi-directional current monitoring
- SOC based on coulomb counting
- Humidity sensor & board temperature monitoring
- Charger detection circuit
- Integrated precharge circuit
- Power button, USB-C, UART, I2C & isolated CAN bus interface
- On board High-Efficiency 3.3V regulator powered from the main battery pack
- High current capacity automotive grade screw connectors for main power connections
- Buzzer & status LED
- Support: overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
- Support: almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.
Packing list:
- 1* PCBA
-
1* HY2.0 single head 10P line
-
1* HY2.0 single head 13P line
-
2* GH1.25 single head 5P cable
-
1* GH1.25-5P to Dupont line
-
1* USB cable type-C data cable
-
1* 2.0MM jumper cap
-
1* 1.3 inch OLED display LCD screen module
-
1* 12MM 3-6V key switch
-
4* M5*8 stainless steel round head screws
-
4* M5 copper gasket
-
4* 90 degree angle terminal block T90-6/5
-
1* XT30 (female)
Video:
