Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For Efoil | Esurf | ESK8
Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For Efoil | Esurf | ESK8
Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For Efoil | Esurf | ESK8
Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For Efoil | Esurf | ESK8
Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For Efoil | Esurf | ESK8

Flipsky 2.4G Wireless Module Waterproof Remote VX3 Pro controller For Efoil | Esurf | ESK8

Regular price $110.00
-4 in stock

Spec:

  • 1.8-inch super clear and big screen display
  • Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information
  • Be compatible with Flipsky FSESC/FTESC and other VESC and Non-VESC
  • ESK8 mode / E-surf mode switching freely
  • Esurf mode:Cruise speed control function
  • Waterproof IP rating: IP67
  • Bigger remote battery capacity:1500MA
  • ESC failure report :Detect possible failures of the ESC in time for replacing
  • Controller mode: PPM/UART
  • Charging way:Wireless Magnetic Charging
  • VX3 Pro Remote comes with Receiver (support Flipsky non-vesc)
  • Support online upgrade firmware

Feature:

1. Replace the communication module with SX1280;
2. The transmitter microcontroller is replaced with GD32F303CGT6;
3. Add FTESC ESC UART control protocol;
4. Add UART, PPM, UART&PPM control modes;
5. Function switching is changed to joystick up and down switching control;
6. Add gear lock function;
7. Add low battery alarm function for skateboards and surfboards;
8. Add total mileage display function;
9. The maximum wheel diameter can be set to 999mm;
10. Add the function of modifying the default gear at startup;
11. Add whether the cruise mode/reverse function is turned on and can be modified;
12. The maximum number of wheel gears can be set to 999mm;
13. Optimize the screen refresh frame rate and faster data refresh display.

Wiring Diagram: