Spec
- Voltage: 6-20S (25.2-84V)
- Max Spin Speed (RPM): 16380
- KV (RPM/V): 120KV / 100KV
- Rated Power: 3000W
- Max Power: 6000W
- Rated Current: 60A
- Peak Current: 200A
- Rated Torque: 6.3 N·m
- Max Torque at 60%: 9 N·m
- Dimensions: D65*L161mm
- Max Working Temperature: 120°C
- Insulation Voltage & Leak Current: AC 500V / 1mA / 3s
- Lead Wires Extension: 8AWG × 1300mm
- Waterproof Level: IP68
- Weight: 3kg
- Plug: 8.0mm bullet plug
- Motor Wires: 3 × 8AWG (6.5mm)
- Resistance: 58mΩ
- Shaft: Ø12 -0.005/-0.01mm
- Number of Slots & Poles: 18N / 6P (Please set as 3 pairs when do setup)
- Inductance: 170μH
Why upgrade from oil sealed to water/ceramic sealed)?
Add a ceramic ring in the middle, reduce the direct contact between the sealing ring and the bearing, extend the life of the bearing; improve the waterproof performance
Update Detail:
Water-seal has 2 parts
2 strong hardness ceramic run with each other and metal ring part spins together with shaft&ball bearing,
which can prevent the abration between shaft and water-seal, extend the motor lifespan with better IP rate.
12mm Splinded shaft ：
12MM ROUND WITH THREAD:
The difference between the two shafts
Application:
Efoil, Electric surfboard, Electric Hydrofoil,Foilsurf,Surffoil, RC Boat, Esurf, Jetski, Jetboard, etc.,
