FLIPSKY FT85KS 85V 250A ESC supports ordinary upgrade switches and smart switches NON-VESC For Electric Skateboard / Scooter / Ebike Speed Controller / Electric Motorcycle / Robotics
- In stock, ready to ship
Smart Anti-spark Switch:Toggle the Rolling Start switch ON when use the self-resetting smart switch
Normal Power ON/OFF Switch:Toggle the Rolling Start switch OFF when use the self-lock switch
flipsky_esc_tool software and manual download link
Specifications :
- Firmware: V1.4 or above (firmware update via Flipsky ESC Tool supported)
- Voltage: 14V-85V (safe for 4S-20S)
- Continuous current: 250A (Values depend on the mounting, ambient temperature and air/water circulation around the device!);
- Peak Current: 400A
- BEC: 5V@1A
- Programmable Tool: Flipsky ESC TOOL
- PWM Frequency Control: YES
- Multiple Speed Gear Limit Control:YES ( in UART / ADC mode)
- Regenerative Capacity: Yes
- Communication Ports: USB, CAN, UART, PPM, ADC
- IInput Signals Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only at present), PAS
- Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored),Encoder (ABI, AS5047 SPI interface)
- Multiple Speed Gear levels: Low, Medium, High, Reverse
- Integrated Smart Switch Function: supports sliding / rolling on and automatic shutdown function; supports modification of automatic shutdown time (standby current as low as 50uA)
- Two Power ON/OFF Switch Options: Self-resetting switch with green LED, button diameter: 16mm;
- Self-locking switch with red LED, button diameter: 16mm (When using the self-locking switch, please remember to OFF the “Rolling Start ON” switch. Otherwise, the ESC can not be powered off.)
- Built-in IMU chip LSM6DS3TR-C (accelerometer, gyroscope)
- Power Wire: 8.0mm bullets female X 2pcs
- Motor Wire: 8.0mm bullets female X 3pcs
- Size: L140*W69.6*H32mm (including Alu.Case)
Features:
- Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.
- 240MHz and the max PWM switching frequency 25KHz improves the motor RPM
- Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways
- Programmable via Flipsky remote controller VX4 (remote firmware version: VX4_V1.4.0 or above).
- Supporting motor FOC with low working noise and smooth starting.
- Supporting Real-time data and fault alerts.
- Supporting adaptive variable PWM frequency control
- Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).
- Supporting control types: Current, Duty Cycle, Speed control, Position Control
- Protection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection.
- Supporting extra interfaces like front lights, brake lights and horn fixtures (12V 3A) which can be controlled by remote VX4 or external switches.
- Supporting various motor temperature sensor types such as NTC-10K-25℃, NTC-10K-100℃, PT1000, PTC-1K-100℃, KTY and so on.
Wiring diagram:
