Electric Skateboard Motor BLDC 5065 270KV 1550W

Product Spec:

• Max Power: 1550 Watts
• Max Current: 80 Amps
• No-load Current: 1A 10V
• Max Volts: 41.5V
• Lipo: 3S-8S (11.1V-29.6V)
• Max Torque: 4Nm
• Motor Resistance: 64mΩ
• Weight: 0.99 lb / 0.45 kg
• The motor length:65mm
• The motor diameter: 50mm
• SHAFT: Diameter 8mm, 20mm length, 3x3x15mm keyway slot.
• Motor Wire: 160mm silicone 16AWG wire with 4.0mm Gold Bullet Connector Male.
  • Wire configuration:
    • Blue（Heat shrinkable film） = A
    • Black （Heat shrinkable film）= B
    • Yellow （Heat shrinkable film）= C
• Brushless Motor
• The number of pole: 14

Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch

• Internal PCB with 120 Degree Hall Effect Sensors.
• Motor can be used with or without a sensor. Sensorless operation is most common.
• VESC Sensor Wires required to use with VESC.
• Wire configuration:
  • Red = 5v
  • Blue = A
  • Yellow = C
  • Green = B
  • Black = GND
  • White=Temp

What's Our Product Features:

• Stator: Lamination Japan steel
• 16awg high strand silicone wire with 4.0mm gold bullet connectors.
• Both support sensor and sensorless mode! 

•  5065 270KV EPOWER Motor (Fits 50mm Motor Mount)
• If you choose motor with pulley, it comes randomly black one or white one

Reference Information:

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts. 
•  Screws to mount the motor are not included with the motor.
• The key for keyawy is not included with motors for shipping