Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
Automotive grade monitoring & balancing IC with separate power supply for increased reliability
Voltages measurements for load, charger & battery pack
Bi-directional current monitoring
SOC based on coulomb counting
Humidity sensor & board temperature monitoring
Charger detection circuit
Integrated precharge circuit
Power button, USB-C, UART, I2C & isolated CAN bus interface
On board High-Efficiency 3.3V regulator powered from the main battery pack
High current capacity automotive grade screw connectors for main power connections
Buzzer & status LED
Support overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
Support almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.
Mini Portable DIY Spot Welder Rechargeable Color Screen Display DIY Battery Pack Welding FS-SW2
-12 in stock
Recommended nickel strips: 0.1-0.2mm
Menu display: 1.8 inch color LCD
Working mode: automatic/manual
Built-in battery: 10000mAh
Shell material: aluminum alloy
Thickness of soldering pen wire: 8AWG
Cycle charging: support
Protection reminder: support
Firmware upgrade: support
Automatic shutdown: support
Power display: support
Temperature detection: support
Electric Skateboard T Tool Black
-117 in stock
This is a skate tool with a hidden hex/phillips-head screwdriver built inside. You can tighten up any loose parts or fix your skateboard on-the-go!
Includes: T tool comes with a hex head in 3 sizes: H9.5, H13, or H14.
SQ-A110 110W Electric Solder Iron Intelligent Constant Temperature 100-500°C/212-932°F Antistatic
20 in stock
Temperature range: 100-500 ° C (212-932 ° F)
Power supply: 220V 50Hz / 110V 60Hz
Grounding impedance of welding nozzle: < 2 Ω
Ground voltage of welding nozzle: < 2mv
Dimension (about): 236mm (length) x 23.6mm (maximum diameter) / 9.29in (length) x 0.93in (maximum diameter)
The advantage of the SQ-A110
Small size, three key design, powerful function.
Fast temperature recovery, heating speed 8 seconds.
High quality heating body, high platinum temperature sensitivity.
Two display temperature modes (Celsius, Fahrenheit).
With sleep function to save energy and LED indicate sleep state.
Microcomputer temperature compensation value, temperature error less than plus or minus 5 degrees.
High insulation, soft touch power cord.
Digital display, clear content at a glance.
Memory mode function.
Handle is made of special high temperature resistant material and ESD anti-static treatment.
Equipped with black diamond solder tip, it has strong tin loading capacity and fast heat transfer speed.
Reminder: It is a normal phenomenon that the first use of Electric Soldering Iron may cause smoke,because there flux at the heat of the electric soldering iron .the first use will smoke,not a quality problem.
1 x SQ-A110 Intelligent constant temperature electric soldering iron
(optional 220v European and 110v American plugs)
1 x Instructions
1 x Thick large 900M-T-K
1 x Metal soldering frame
SQ-001 Upgraded | Mini Smart portable 65W soldering iron | DC 12-24V power supply| SQ-001 electric soldering iron
57 in stock
Model name: SQ-001
Color: Black, Blue
Temperature range: 100-400 °C / 212-752°F
Factory default temperature: 300 °C / 572°F
Power supply: DC 12-24V 5.5 * 2.5mm standard interface
Preset temperature 300℃(Initial setup)
Power saving temperature 200℃(Initial setup)
Operating voltage Power The fastest time to heat up
12V 17W 40s
16V 30W 20s
19V 40W 15s
24V 65W 11s
Universal interface expand the scope of application
Super Light weight & mini size (with iron tips assembled): 31g / 172mm
Multiple choice of power supply
The Advantage of Upgraded Version SQ-001
MINI SQ-001 Electric soldering iron is an upgraded version of internal heat intelligent numerical control soldering iron. Lightweight design, easy to install and use, easy to remove and store, comfortable control handle, high-efficiency heating end, simple control interface. It is a favorite tool for electronic engineers and electronic maintenance enthusiasts.
It can work in DC 12-24V, OLED screen display, key temperature adjustment, external independent power supply. In DC 19V 40W state, 15 seconds temperature rise to 300 ℃.
SQ-001 intelligent temperature control between 100-400 degrees, more stable temperature, instantaneous temperature rise, automatic sleep, over temperature alarm and other functions
The heating end adopts internal heating core
Temperature stability range: ± 2%
External independent power supply: DC 5525 power interface, suitable for DC 12-24v notebook power supply, vehicle power supply and mobile power supply.
Micro USB interface: set temperature rise curve, user defined function key and firmware upgrade function through parameter file.
Additional functions: application layer open source design. You can change the internal parameter settings according to your own needs to meet more and more performance needs of different customers.