Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
please do not remove the shrink to protect the pcb electronics components from impurites or metals which result in short circuit or esc burnt damage.
The Flipsky ESC is based upon the VESC Open Source Project, and compatible with VESC Software.
The Flipsky ESC is a highly modifiable electronic speed controller designed with DIY Electric Skateboards conversions in mind.
The Flipsky ESC allows you to use sensorless motors to achieve smooth start-up from a stop versus traditional RC ESC's which may have trouble starting from a complete stop. It also provides strong. reliable and progressive electric braking.
You can connect your ESC to your computer and modify them using the VESC BLDC Tool. Our ESC ships to you tested multiple times during the production cycle and are ready to use. The ESC will provide optimum performance when configured for your particular motor and battery voltage.
Specs:
◆ Hardware:V4.12
◆ Firmware: V3.38
◆ 4 layers*3oz copper=12oz copper
◆ Amps: 50A continuous, instantaneous current 240A.
◆ Voltage: 8V-60V( Cells: 3-13S LiPo,Safe for 3S to 12S LiPo，Voltage spikes may not exceed 60V! )
◆ Recommended 10S battery
◆ BEC: 5V@1.5A
◆ BEC type: Internal driver support
◆ Timing: Software calibration
◆ Cutoff Voltage: Programmable
◆ Frequency: PWM input
◆ Governor: No
◆ Weight: 80g
◆ Size: 120x56x20mm
◆ Programming card: No
◆ Reverse: Yes
◆ Motor supported:sensor & sensorless brushless motor
◆ Size(mm):120x56x20mm
◆ Application:50A FSESC for electric longboard/RC Car
◆ Motor wire:12AWG
◆ Power cable:12AWG
The shipping package contains:
1*FSECS4.12+Aluminum Case
1* Mini USB
1* VESC Sensor Wire
1*Manual
Manual Download：FSESC_4.12_50A_MANUAL
FSESC 4.12 50A Programming Tutorial Video
Click here for Frequently Asked Questions
