flipsky_esc_tool software and manual download link
Spec:
- Firmware: V1.3 or above (firmware update via Flipsky ESC Tool supported)
- Voltage: 14V-84V (safe for 4S-20S)
- Continuous current: 50V/550A; 75V/450A (Values depend on the mounting, ambient temperature
- and air/water circulation around the device!);
- Peak Current: 1000A
- BEC:5V@1A
- Motor/power Wire Size:8 AWG (3pcs combine)
- Programmable Tool: Flipsky ESC TOOL
- PWM Frequency Control: YES
- Multiple Speed Gear Limit Control:YES (UART / ADC)
- Regenerative Capacity: Yes
- Communication Ports: USB, CAN, UART, PPM, ADC
- Input Signal Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro
- only at present, it will be compatible with more remote controllers soon)
- Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored)
- Multiple Speed Gear levels: Low, Medium, High, Reverse
- Switch Support: Power on/off button switch or key switch
- Size: L227.5*W140*H54mm(with water cooling enclosure)
Features:
- Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.
- 240MHz and the max PWM switching frequency 45KHz, which improves the motor RPM.
- Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different
- batteries voltages and many control ways.
- Programmable via Flipsky VX4 remote (Firmware Version:VX4_V1.2.1or above)
- Supporting FOC with low working noise and smooth starting.
- Supporting Real-time data and fault alerts.
- Supporting adaptive variable PWM frequency control.
- Supporting sensor mode(HALL) and sensorless modes (IPDS, HFPI).
- Supporting control types: Current, Duty Cycle.
- Protection functions: low and high voltage protection, motor over-temperature protection (suitable
- for NTC-10K-25℃ temperature sensing resistance only), battery over discharge protecting,
- mosfets over current and over-temperature protection.