Flispky FT110400A IP68 Waterproof Water‑Cooled ESC| 110V 400A FOC Brushless Motor Controller

Specifications:

• Firmware: V1.6 or above (Firmware update via Flipsky ESC Tool supported)
  
• Voltage: 14-110V (Safe for 4-26S)
  
• Continuous current: 100A/400A (Values depend on the mounting, ambient temperature and air/
  water circulation around the device!)
  
• Peak Current: 1000A
  
• Communication Ports: USB, CAN, UART, PPM, ADC/PAS
  
• Input Signals Support: PPM, ADC, PAS(Cadence Input Signal), UART (Compatible with all
  
• Flipsky VX Series remotes)
  
• BEC: 5V@1A
  
• Programmable Tool: Flipsky ESC TOOL
  
• PWM Frequency Control: YES
  
• Multiple Speed Gear Limit Control: YES (UART&ADC)
  
• Regenerative Capacity: YES
  
• Integrated Self-locking Switch: 16mm Red Button
  
• Motor/power wire size: 6AWG
  
• Size: L245.5*W144.5*H70.5mm(with enclosure)

Feature:

• Fully sealed with IP68 water-proof rate.
  
• Adopting ARM Cortex-M4 structure with the max 240MHz , improves PWM switching frequency and the motor RPM.
  
• Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways.
  
• Programmable via Flipsky remote controller VX4Pro(ESC firmware version: V1.5 or below).
  
• Supporting motor FOC with low working noise and smooth starting.
  
• Supporting real-time data and fault alerts.
  
• Supporting adaptive variable PWM frequency control.
  
• Supporting save/load configuration files via ESC Tool.
  
• Supporting multiple speed levels: Level 1(Low), Level 2(Medium), Level 3(High), Level 4 (PAS Only),
  Level 5 (PAS Only).
  
• Supporting sensor mode(HALL, ENCODER) and sensorless mode(IPDS, HFPI, OPEN).
  
• Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL, ENCODER (such as ABI Encoder,
  AS5047 SPI, TLE5012 SPI, AS5600 IIC), OPEN (Sensorless Open-Loop Startup)
  
• Traction Control: YES
  
• Supporting control types: Current, Duty Cycle, Speed control, Position Control.
  
• Supporting PAS cadence sensor.
  
• Supporting emergency stop and shutdown.
  
• Support safe power-on protection (in PPM&ADC control modes only).
  
• Protection functions: low and high voltage protection, MOSFET over-temperature and over current
  protection, battery overcharge and discharge protection, motor over-temperature protection.
  
• Supporting multiple typed of motor temperature sensors such as NTC-10K-25℃ , NTC-10K-100℃ ,
  PT1000, PTC-1K-100℃ , KTY and so on.

Wiring diagram:

Manual：

https://cdn.shopify.com/s/files/1/0011/4039/1996/files/FT110400A_V1.6_20261028.pdf?v=1793849574