Flipsky 12S 200A Smart BMS For ESK8 / Consumer Robot / E-car/ E-board
Flipsky 12S 200A Smart BMS For ESK8 / Consumer Robot / E-car/ E-board
Flipsky 12S 200A Smart BMS For ESK8 / Consumer Robot / E-car/ E-board
Flipsky 12S 200A Smart BMS For ESK8 / Consumer Robot / E-car/ E-board
Flipsky 12S 200A Smart BMS For ESK8 / Consumer Robot / E-car/ E-board

Flipsky 12S 200A Smart BMS For ESK8 / Consumer Robot / E-car/ E-board

Regular price $235.00
0 in stock

Spec:

  • Support max charging voltage60V,minimum charging 14V.
  • Over charge detect and release voltage: 2V-5V
  • Over charge protection delay: ≥4ms
  • Discharge current and overcurrent protection value:≤200A
  • Over discharge detect / release voltage: 0-5V
  • Over current detect delay:≥4ms
  • Short Circuit detect delay: 320us
  • Short circuit protection release condition: disconnect the load
  • Balance current:86mA @4.2V
  • temp protection: -20℃—+120℃
  • Temp Range:-20℃—+80℃
  • Temp Range:-20℃—+100℃
  • Working current:≤40mA
  • Sleep current:≤100uA

Features:

  1. Compact layout and mini
  2. Automotive grade monitoring & balancing IC with separate power supply for increased reliability
  3. voltages measurements for load, charger & battery pack
  4. Bi-directional current monitoring
  5. SOC based on coulomb counting
  6. With humidity sensor and circuit board temperature monitoring.
  7. Charger detection circuit
  8. Integrated precharge circuit
  9. Power button, USB-C, UART, I2C & isolated CAN bus interface
  10. On board High-Efficiency 3.3V regulator powered from the main battery pack
  11. High current capacity automotive grade screw connectors for main power connections
  12. Buzzer & status LED
  13. Aluminum alloy shell for better heat dissipation
  14. Automotive grade design, automotive grade locking connector.
  15. Compatible with MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.

Wiring diagram: