Flipsky FSESC 75300 84V High Current 350A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot Surfboard AGV Robot
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
Spec:
- Firmware: 5.2, supports firmware upgrade
-
Voltage:14-84V (safe for 3-20S)
-
Continuous Current : 50V/300A,75V/200A (Duration depends on external heat dissipation)
-
Max Current :350A
-
Supported sensors: ABI, HALL, AS5047,AS5048A
-
EPRM:150000
-
Size:154*100*46.5mm((Including the height of water pipes and electrolytic capacitors)
Feature:
- Regenerative braking
- The CPU adopts the 32F405 with the main frequency of 168MHz and the Cortex-M4 architecture with DSP function;
- Sensored or sensorless operation + hybrid mode
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, ADC, NRF,UART,PAS
- Communication ports: USB, CAN, UART,SPI,IIC
- Throttle curve and ramping for all input sources
- Seamless 4-quadrant operation
- Motor revolution, ampere hour, watt hour counting
- Real-time data analysis and readout through the communication port.
- Adjustable protection against:
- Low input voltage
- High input voltage
- High motor current
- High input current
- High regenerative braking current (separate limits for the motor and the input)
- High RPM (separate limits for each direction)
- Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurate
- Motor wire: 8AWG
- Power cable: 8AWG
- Waterproof level(with water cooling enclosure): IP65
