Please use 5V/2A charger for VX4 (Max. Input voltage of 6.5VDC for VX4). Do NOT use a charger with an output voltage more than 6.5V, otherwise the VX4 remote controller may be damaged.

Note: USB cable black or white will be shipped randomly.

Feature:

• Color screen(240*240 circular high-brightness LCD screen)
• Option choice for km/h and miles/h
• Option choice for FSESC and other VESC( FOCBOX)
• Use Sx1280 chip,which is based on Loraspread spectrum modulation technology,it has up to 13dB of co-channel rejection.
• Support PPM,Uart,ppm and uart mode.
• Support Remote and receiver upgrade.
• Support 3 speed modes(Default H--high speed)
• Support cruise control mode
• Remote and E-skateboard power indication lights
• Rechargeable Li-ion Battery:1200mAh
• Wrist strap
• VX4 remote comes with receiver

Wiring Diagram:

Detail:

Shipping package:

1pcs VX4 remote

1pcs Uart cable

1pcs PPM cable

1pcs USB TypeC cable

1pcs Manual

Reference video：

Flipsky_VX4_V1.2 firmware and manual download link:

Remark:

1.all these parts in the kit are unassembled when shipment.

2.this All Terrain kit come without motors, it can suitable for flipsky 63 series Motors,recommend motor:6384/6374 /63100 etc . (If you need other KV values, please leave order notes, otherwise 190KV will be sent by default)

Truck:

• Truck Length: 420mm / 16.5''
• Axle Length: 60MM / 2.4''
• Axle Diameter: 10MM

Others：

• hub material: Aluminium Alloy
• Tyre Material: Rubber
• Axle Hole Size:10 mm
• Tyre Pressure: 60PSI 410kpa
• HUB Axle Diameter: 10 mm
• HUB Teeth: 72 teeth
• Pulley teeth:16T HTD5M
• Gear ratio:  72:15
• Belt:445 mm length,15mm width

Detail size:

Package included:

Features:

• Max Speed: 35 KM/H( 21.7 MPH)
• Deck : 8 Layers Maple
• Charging Time : 4-5h
• Battery: Samsung 6.0Ah
• Voltage: 42V
• Motor Power: 600W*2
• Wheels: 90*54mm PU Wheels
• Hill Climbing: 15-20%
• N.W.:7.4KG
• G.W.: 9.7KG
• Range: 20-25KM (Average speed) 15-18KM(High speed)
• Max load : 280 pounds (150 kg), recommending riding weight is 264 pounds(120 kg) and below
• Remote: Smart LCD remote with 4 speed modes
• Size : 37.4"*10.6"*5.1”( 950*270 *130mm )

The advantages of  Flipsky F1 Electric Skateboard :

1. Samsung battery: brand battery with small internal resistance, large discharge capacity and low heat generation, which is reliable and durable performance.
2. Smart slide/roll to turn on start; auto-turnoff after 5 minutes no work .
3. Good stability: 8 layers of maple deck used, which has good elasticity and break-resistant. The perfect combination of trucks and 90mm PU wheels creates a comfortable sliding experience.
4. Smart LCD remote controller: speed, battery, and range etc, visible to see all the data you need.
5. The 4 speeds of the remote control are available for users to choose: high, medium and low, and the sports gear accelerates and reacts faster .

About shipping:

• Free shipping of this product 
• By air it takes about 10-18days arrival ;by sea it takes about 25-60 days arrival .

Reference video:

Spec:

• Firmware: 6.02 (firmware update supported)
• Voltage:14-75V( safe for 3-16S)
• Continuous Current : 200A
• Max Current :300A
• Supported sensors: ABI, HALL, AS5047,AS5048A
  
• EPRM:150000
• Phase filter: No

Feature:

• Regenerative braking
• Sensored or sensorless operation + hybrid mode
• Configurable RPM-, current-, voltage- and power limits
• Input source: PPM, Analog, NRF Nyko Kama Nunchuck
• Communication ports: USB, CAN, UART
• Throttle curve and ramping for all input sources
• Seamless 4-quadrant operation
• Motor revolution, ampere hour, watt hour counting
• Real-time data analysis and readout through the communication port.
• Adjustable protection against:
• Low input voltage
• High input voltage
• High motor current
• High input current
• High regenerative braking current (separate limits for the motor and the input)
• High RPM (separate limits for each direction)
• Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurate
• Motor wire: 8AWG
• Power cable: 10AWG
• Waterproof level(with water cooling enclosure):IP67

Warm tips:

More Detail:

Wiring Diagram With Aluminum Case:

Wiring Diagram With Water Cooling Enclosure: 

Spec:

• Hardware Version:ODESC4.0/4.1 Single Drive
• PCB layer Number:ODESC4.0/4.1 4 layer*2
• Applicable Voltage: ODESC4.0 8-24V;V4.1 8-56V
• Current Parameter:50A continuous/120A peak
• Support Encoder:Incremental Encoder, Absolute Encoder, Houle Sensor, AMT102, AMT103, TLB5012, AS5047
• Communication Interface:USB-Protocol Open Source (PC, Raspberry Pie, Ros) , UART (Embedded Devices) , PWM (RC Remote) ,STEP/DIRECTION（PLC）、GPIO、CAN、ANALOG INPUT
• Voltage Protection:Programmable Voltage Protection to Prevent Excessive Battery Discharge
• Movement Pattern:Speed Mode, Torque Mode, Current Mode, Position Mode, Trajectory Mode, etc.

Feature:

The ODESC high performance brushless driver is based on the open source project ODrive hardware optimization enhancement, stable performance, and match the original Odriver firmware. The USB connected PC terminal can realize motor debugging and complicated multi-axis control, and can realize FOC control for most brushless motors. With the use of encoder, it can also realize any torque, speed loop, position loop, current loop, and position control based on trajectory planning, can be widely used in flexible robot joints, robotic arms, 3D printing, camera universal joints, pan rail, CNC milling machines, ship models, car models and other DIY, industrial and automation fields.

Wiring Diagram:

ODESC4.0/4.1

Please use 5V/2A charger for VX2 (Max. Input voltage of 6.5VDC for VX2). Do NOT use a charger with an output voltage more than 6.5V, otherwise the VX2 remote controller may be damaged.

Features:

• Color screen
• Option choice for km/h and miles/h
• Option choice for FSESC and other VESC( FOCBOX)
• 2.4Ghz band width
• Real time data reading and 0.95OLED display
• Support 3 speed modes
• Support cruise control mode
• Remote and E-skateboard power indication lights
• Rechargeable Li-ion Battery
• Wrist strap
• Battery last for 12 working hours
• VX2 Remote comes with Receiver

Receiver Connection Diagram

For Dual FSESC6.6 Big size :

For Dual FSESC4.20 :

Remark:

2.The Flipsky VX2 remote just can compatible with base on vesc , if your VESC has changed the program, please choose to purchase carefully.

Function Show

Please use 5V/2A charger for VX1 (Max. Input voltage of 6.5VDC for VX1). Do NOT use a charger with an output voltage more than 6.5V, otherwise the VX1 remote controller may be damaged.

Features

• 2.4Ghz band width
• Support 3 speed modes
• Support cruise control mode
• Remote and E-skateboard power indication lights
• Support checking remote battery volume
• Comfort touch: ABS+Rubber painting surface
• Rechargeable Li-ion Battery
• Wrist strap
• VX1 Remote comes with Receiver 

Function Show

Kindly Reminder !

1.Please carefully check following receiver connection diagram corresponding with different FSESC, wrong cable collection in reciver side will cause the receiver burned. 

2. The variants (for VESC4/ for VESC6 / For Non VESC) only differenciate on reciver cables , the remote is the same one. 

3. When you choose UART mode connection for VX1 remote receiver, pls do connection after your programming in VESC tool. Or else , it will influence programming. And In UART mode, there is no need to do adjust for remote. 

Receiver Connection Diagram

For Single V4

For Dual FSESC4.20: Both hook up with bluetooth and remote receiver

For Single V6

For Dual FSESC6.6 Plus : both hook up with bluetooth and remote receiver

For PPM mode(or Non VESC )

Manual：VX1_Remote_VX1_product_manual_-20190316.pdf

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Spec:

• Weight: 1.4KG
• Max Power: 5500W
• Motor KV: 190/170/140KV
• Max. current: 100A
• Battery type: 4-14S
• Recommend ESC: VESC6
• Torque: 10Nm
• Diameter(mm): 63
• Length(mm): 100
• Total length (mm):130mm(including 8mm round shaft) / 125mm(including 10mm D shaft)
• Shaft(mm): 8mm/10mm
• Bullet connector: 4mm

Detail:

10MM D Shaft Motor Drawings：

8MM Round Shaft Motor Drawings：

10MM Round Shaft Motor Drawings：

Reference video:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Product Spec:

• Max Power: 4000 Watts
• Max Current: 95 Amps
• Max Volts: 4-14S 
• Max Torque: 9Nm
• Motor Resistance: 0.05Ohm
• Recommend ESC:VESC4&VESC6(3-12S )
• Weight: 1100g
• The motor length:84mm
• The motor diameter: 63mm
• Shaft Diameter 8mm, 30mm length
• Motor Wire:  12AWG wire with 4.0mm Gold Bullet Connector Male.customizable 5.5mm gold plated connector
  • Wire configuration:
    • Blue = A
    • Black = B
    • Yellow = C
• Stator: 0.2mm thickness lamination japan steel
• Magnet: N42SH high temp curve magnet
• BLDC Motor
• The number of pole: 14

More Detail:

8MM Round Shaft Drawing:

10MM Round Shaft Drawing:

10MM D-shaft Drawing:

Reference Video:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Feature:

• KV: 140/190KV
• Max Power: 3500Watts
• Max Current: 85 Amps
• Volts: 4-14S
• Max Torque: 8Nm
• Motor Resistance: 0.05Ohm
• Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
• The number of pole: 14
• Net weight: 980g
• Motor wire:12AWG
• Shaft size : 8mm/10mm

Reference Information:

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
• Screws to mount the motor are not included with the motor.
• If you choose round shaft motor, shipping includes the key for the keyway
  
• If you choose the shipping comes with pulley, will come with 8mm steel material pulley.
• The Flipsky logo is in different places, will be shipped randomly.

  
  

More details:

8MM Round Shape Shaft Drawing（108mm length）: 

10MM D-Shape Shaft Drawing(99 mm length）: 

Reference Video:

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Specs:

• Max Power: 2450 Watts
• Max Current: 65 Amps
• Volts: 4-14S 
• Max Torque: 7Nm
• Motor Resistance: 0.053Ohm 
• Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
• Weight: 1.23 lb / 0.56 kg
• The motor length:54mm
• The motor diameter: 63mm
• Shaft diameter: 10mm D Shaft ,24mm length/8mm Round-short shaft,24mm length/8mm Round-long shaft,30mm length
• Motor Wire: 320mm silicone 12AWG wire with 4.0mm Gold Bullet Connector Male.
  • Wire configuration:
    • Blue = A
    • Black = B
    • Yellow = C 
• BLDC Motor
• The number of pole: 14

Reference Information:

• The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
• Screws to mount the motor are not included with the motor.

Difference Long Shaft and Short shaft ：

More Detail:

6354 10MM D Shaft Motor Drawing:

6354 8MM Round-Short Shaft Motor Drawing:

6354 8MM Round-Long Shaft Motor Drawing:

Spec:

• Voltage range: 6-20S (25.2-84V)
• Max power: 3000W; Continuous power: 1500W
• Peak current: 70A; Continuous current: 30A
• Motor KV: 160KV
• Max spin speed(RPM): 8064
• Size: OD65*L111mm
• Shaft diameter: 10mm
• Motor pole: 6pcs; 3 pairs
• Motor stator slot: 12
• Waterproof rate: IP68
• Lead wires extension: 12AWGx1400mm

The thrust under the condition of reaching this voltage and current as below:

• 48.5V 2.7A 5KG
• 48.5V 8.2A 10KG
• 48.5V 18.2A 15KG
• 48.5V 20A 17KG
• 48.5V 25A 19KG
• 48.5V 30A 21KG
• 48.5V 35A 23KG

Drawing:

Double kingpin trucks increase carving possibilities Constructed from high-quality aluminum matrial, made by gravity casting technology, trucks are after heat treatment, very strong .

What is advantage of gravity casting technology？

• Aluminum liquid flow into truck mould by liquid's weight naturally, this way can delete mould's inside air clearly.
• can do heat treatment after demoulding.
• Aluminum hardness reached out HRB65 around .
• can stand over 150kg weight.

12 Inches truck detail:

Detail size  of  12 Inches  Trucks(recommended motor:6354 motor/Flipsky 10mm D-shaft 6374(99mm length）motors）

Shipping package:

1. Front and back truck

2.2pcs motor mounts( with motor mount option)

Spec :

7"ATM Offroad Wheel

• Size:7'' ATM 175x50mm
• Tire Width: 2''
• Axle diameter:1/2"
• Loading Capacity:120KG 
• Wheel bearing:608
• Pulley bearing:6000RZ
• Pulley Teeth: 66T
• Belt:360mm,15mm Width
• Bearing diameter: 8mm（Not applicable to 13.78/15.2 Inches Truck ）
  

6"ATM Offroad Wheel

• Size:6'' ATM 150x50mm
• Tire Width: 2''
• Axle diameter:1/2"
• Loading Capacity:120KG 
• Wheel bearing:608
• Pulley Teeth: 60T
• Belt:335mm,15mm Width
• Bearing diameter: 8mm（Not applicable to 13.78/15.2 Inches Truck ）

Features:

• STREET PROFILE/OFF-ROARD DESIGN & HIGH WEARABILITY
• HARDNESS ALLOY HUB & HIGH TENACITY
• CARBEN BEARING & ROTATING FLEXIBLE

Detail:

Spec:

• Size:6'' ATM 150x50mm
• Wheel bearing:608RS
• Pulley bearing:6900RS
• Pulley Teeth: 60T
• Belt:335mm,15mm Width
• Material:Nylon

Package included:

4pcs wheels

2pcs belts

2pcs Pulley

Group T5 DIY Electric Skateboard Double Kingpin Trucks and Motor Kits (Dual Drive)

1*12"Double Kingpin Trucks（front and back truck)

1*motor mount mount (pairs)For 12" kingpin trucks 63 series random option

1*Honeycomb Wheels（included 4wheels and two 335mm belts）

2*Flipsky Battle Hardened 6354 or 6374 Motor With Pulley( 10mmD-shaft motors-99mm length)

Spec:

• Type: Deep groove ball bearings 
• Rolling Block material: Bearing steel
• Size : (Inner diameter /outer diameter/thickness)-10*28*8mm

Working principle:

Deep groove ball bearings mainly take radial load, but also can support radial and axial load. When the only radial loads, the contact angle is zero.
When the deep groove ball bearings with a larger radial clearance, with angular contact bearings can bear large axial load, deep groove ball bearing friction coefficient is small, the speed limit is also high.

Package included:
1x Deep groove ball bearing

Spec:

Suitable for Flipsky 6354/6374/6384 motor

Package included:

1pcs 6900zz

2pcs 6800zz

Spec:

• Axle Diameter: 8/10mm

• Material: Aluminum Alloy

• Color: Black

The detail size of 63 Series motor mount(Axle Diameter:10mm),Suitable for 6354/6374/6384 motors

The detail size of 50 Series motor mount(Axle Diameter: 8MM):(Suitable for H5045/H5055/H5045/H6368 motors,not suitable for 5065 270KV motor )

Package included:

2pcs motor mount