Flipsky 75200 84V High Current With Aluminum PCB Based on VESC For Fighting Robot Surfboard AGV Robot
Regular price
$229.00
Sale price
$213.00
Specs:
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
Specs:
- Firmware: 5.2, supports firmware upgrade
- Voltage: 14-84V (safe for 4-20S)
- Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
- BEC: 5V@1A
- Support Modes: DC, BLDC, FOC (sinusoidal)
- ERPM: 150000
- Communication Ports: USB, CAN, UART, SPI, IIC
- Supported Sensors: ABI, HALL, AS5047, AS5048A
- Input Source Support: PPM, ADC, NRF, UART
- Supported Sensorless: Yes
- Regenerative capacity: Yes
- Programmable via VESC_TOOL: Yes
- 75200 Size:130x67.7x40.1mm(Including alu. case)
- Motor/power wire size: 8 AWG
Features:
1.Adjustable protection against: low voltage protection, high voltage protection, over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
2.Support various control modes: Current / Duty cycle / Speed / PID control modes.
3.Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
4.CPU:32F405 with frequency 168MHz
5.Aluminum PCB with good heat dissipation to expand life span.
6.Two COMM ports: UART bluetooth module, screen display or remote controller supportable.
Warm tips:
Phase filering is not available for Flipsky ESC75100 and 75200!
Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
Here below video and blog links FYI.
YouTube：Click here
Blog：Click here
Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
Here below video and blog links FYI.
YouTube：Click here
Blog：Click here
Wiring diagram：
Flipsky 16.3" CNC New Upgrade RKP Trucks For DIY Electric Skateboard | Longboard | Esk8
Regular price
$369.00
Sale price
$295.00
Detail size:
Feature:
- All CNC 7075 material, multiple hollows, surface sandblasting and anodized black treatment
- The axle material is 42crmo high-strength steel, heat treatment and tempering.
- The shortest center distance of motor bracket design is 112.8, the maximum center distance is 119, and the material is 6061t6
- The motor mount compatible with 63 and 70 series motor hole position. The length of the belt used by the whole machine is 5m and the tooth shape is 425 long and 20 wide. The material is 6061t6
7” ATM Wheel Spec:
- Size:7'' ATM 175x50mm
- Loading Capacity:200KG
- Belt:20mm Width
Detail size:
FLIPSKY FSESC6.9 Plus Base on vesc6.6 With Power Button
Regular price
$216.00
Sale price
$163.00
Specs:
Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
Specs:
- Firmware: Latest Version
- Continuous current: 100A; instantaneous current: 200A
- Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )
- BEC: 5V@1A
- ERPM: 150000
- Control Interface Ports:USB,CAN,UART
- Supported Sensors:ABI，HALL，AS5047，AS5048A
- Input Set Support:PPM, ADC, NRF, UART, SPI, IIC
- Modes:DC, BLDC, FOC (sinusoidal)
- Regenerative capacity: Yes
- Programmable: Yes
- Motor wire: 10AWG
- Power cable:8AWG
- Size:102.8x66x38mm
Feature:
- Support four control modes: Current/Dutycycle/Speed /Position control mode.
- Using 6pcs SFT01N10T high current MOSETS (100V 500A).
- Protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection.
- Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
Wiring Diagram:
Flipsky Top Speed Durable Carbon Fiber Deck Lightning Electric Skateboard Longboard
Regular price
$2,399.00
Remark: Pre-sale order, we will ship in 15 days since your order.
Specs:
The shipping package contains:
Remark: Pre-sale order, we will ship in 15 days since your order.
Specs:
| Brand: | FLIPSKY | Model: | Lightning-FS-AT2WD |
| Product Size： | 1189*414*175mm | Deck Material： | Carbon fiber |
| Trucks： | 16.3” CNC Trucks | Trucks Material： | 7075 Aluminium alloy (CNC) |
| Wheel Size: | 175*50 ATM Wheel | Hub Material: | 6061 Aluminium alloy (CNC) |
| Ground Clearance: | 86mm | Slope: | 50% |
| Max load： | 250KG | N.W. | 25kg |
| ESC： | Dual 75100/Dual 6.9 | Voltage： | 58.8V / 50.4V |
| Remote Controller： | FLIPSKY VX4 | Speed Modes： | 3 |
| Motor： | FLIPSKY 6384 170KV/190KV | Motor Power： | 4000W |
| Battery： | Molicel P42A 27100 | Capacity： | 29.4AH / 25.2AH |
| Drive： | Belt HTD5M 425 20MM | Top Speed： | 75km/h |
| Charger Specification： | 58V 6A | Charging time： | About 4.5 hours |
| Anti-Spark Switch： | Antispark Switch Smart(Slide Turnon / Auto Turnoff) | Endurance： |
75km - 100km |
The shipping package contains:
1*Electric Skateboard
1*VX4 Remote
2*175mm Spare Inner And Outer Tube
1*Charger
1*Manual
1*Wrench
6*pu piece
4*Hex keys
Details:
