12" Double Kingpin Trucks for DIY Electric Skateboard | Longboard | Esk8
Regular price$77.90
-98 in stock
Double kingpin trucks increase carving possibilities Constructed from high-quality aluminum matrial, made by gravity casting technology, trucks are after heat treatment, very strong .
What is advantage of gravity casting technology?
Aluminum liquid flow into truck mould by liquid's weight naturally, this way can delete mould's inside air clearly.
15.22 Inches Double Kingpin Trucks for DIY Electric Skateboard | Longboard | Esk8
Regular price$90.00
-165 in stock
Double kingpin trucks increase carving possibilities Constructed from high-quality aluminum matrial, made by gravity casting technology, trucks are after heat treatment, very strong .
What is advantage of gravity casting technology?
Aluminum liquid flow into truck mould by liquid's weight naturally, this way can delete mould's inside air clearly.
16.5"truck With 8'' Pneumatic All Terrain Mountain Wheels and two belt for DIY off road board/ESK8
Regular price$115.00
-62 in stock
Remark:
1.all these parts in the kit are unassembled when shipment.
2.this All Terrain kit come without motors, it can suitable for flipsky 63 series Motors,recommend motor:6384/6374 /63100 etc . (If you need other KV values, please leave order notes, otherwise 190KV will be sent by default)
Truck:
Truck Length: 420mm / 16.5''
Axle Length: 60MM / 2.4''
Axle Diameter: 10MM
Others:
hub material: Aluminium Alloy
Tyre Material: Rubber
Axle Hole Size:10 mm
Tyre Pressure: 60PSI 410kpa
HUB Axle Diameter: 10 mm
HUB Teeth: 72 teeth
Pulley teeth:16T HTD5M
Gear ratio: 72:15
Belt:445 mm length,15mm width
Detail size:
Package included:
1. 1x Front and rear bridge
2. 4x 8" wheel
3. 2x 3200W brushless motor with pulley
4. 2x Motor bracket
5. 2x Motor cover
6. 2x Belt
1pcs 10x28x8mm Deep groove ball bearings 16100DD For Pneumatic Wheels
Deep groove ball bearings mainly take radial load, but also can support radial and axial load. When the only radial loads, the contact angle is zero. When the deep groove ball bearings with a larger radial clearance, with angular contact bearings can bear large axial load, deep groove ball bearing friction coefficient is small, the speed limit is also high.
Package included: 1x Deep groove ball bearing
2.4Ghz Remote VX1 for DIY electric skateboard
Regular price$29.00
-336 in stock
Please use 5V/2A charger for VX1 (Max. Input voltage of 6.5VDC for VX1). Do NOT use a charger with an output voltage more than 6.5V, otherwise the VX1 remote controller may be damaged.
Features
2.4Ghz band width
Support 3 speed modes
Support cruise control mode
Remote and E-skateboard power indication lights
Support checking remote battery volume
Comfort touch: ABS+Rubber painting surface
Rechargeable Li-ion Battery
Wrist strap
VX1 Remote comes with Receiver
Function Show
Kindly Reminder !
1.Please carefully check following receiver connection diagram corresponding with different FSESC, wrong cable collection in reciver side will cause the receiver burned.
2. The variants (for VESC4/ for VESC6 / For Non VESC) only differenciate on reciver cables , the remote is the same one.
3. When you choose UART mode connection for VX1 remote receiver, pls do connection after your programming in VESC tool. Or else , it will influence programming. And In UART mode, there is no need to do adjust for remote.
Receiver Connection Diagram
For Single V4
For Dual FSESC4.20: Both hook up with bluetooth and remote receiver
For Single V6
For Dual FSESC6.6 Plus : both hook up with bluetooth and remote receiver
Please use 5V/2A charger for VX1 Pro (Max. Input voltage of 6.5VDC for VX1 Pro). Do NOT use a charger with an output voltage more than 6.5V, otherwise the VX1 Pro remote controller may be damaged.
Features:
Using 2.4G wireless module-E28-2G4M12S, low power consumption, strong anti-interference ability, long remote control distance
Support 3 speed modes (high gear: red light; middle gear: yellow light; low gear: green light)
Support cruise control mode
Remote control and skateboard battery indicator light
Comfort touch: ABS+Rubber painting surface
Support reverse function
Rechargeable Li-ion Battery (850mAh)
Anti-slip wrist strap
VX1 Remote comes with Receiver
Kindly Reminder ! 1.Please carefully check following receiver connection diagram corresponding with different FSESC, wrong cable collection in reciver side will cause the receiver burned.
2. The variants (for VESC4/ for VESC6 / For Non VESC) only differenciate on reciver cables , the remote is the same one.
Brand new and high quality Connect RC battery to electronic equipment Low resistance and gives the best electric flow PERFECT For RC Drones, Helicopters, Planes, Cars & Trucks Diameter: 4mm / 3.5mm Quantity: 1 Pairs = 1 Male & 1 Female
5.5mm Special Banana AMASS Connectors
Brand new and high quality Gold plated brass with lower resistance 0.25mΩ Diameter: 5.5mm Quantity: 1 Pair = 1 Male & 1 Female
8.0mm Male Female Bullet Connector
Connectors: 8MM bullet plug Recommend motor:FS65161 Quantity: 1 Pair = 1 Male & 1 Female Material of connector:24k gold plated copper
4PCS 6" ATM 150 x 50 All Terrain Honeycomb Wheels With Two Belt For DIY Skateboard
Regular price
Sale price$99.00
-176 in stock
Spec:
Size:6'' ATM 150x50mm
Wheel bearing:608RS
Pulley bearing:6900RS
Pulley Teeth: 60T
Belt:335mm,15mm Width
Material:Nylon
Package included:
4pcs wheels
2pcs belts
2pcs Pulley
4PCS 7" 8'' ATM Offroad Wheel Pneumatic Rubber All Terrain Mountain Wheels Kit With Two Belt For DIY Skateboard /Scooter
Regular price$178.00
-8 in stock
Specs:
7” ATM Wheel Spec:
Size:7'' ATM 175x50mm
Loading Capacity:200KG
Belt:20mm Width
Wheel Pulley Teeth:60T
8"ATM Wheel Spec:
Size:7'' ATM 200x50mm
Loading Capacity:200KG
Belt:20mm Width
Wheel Pulley Teeth:60T
Feature:
STREET PROFILE/OFF-ROARD DESIGN & HIGH WEARABILITY
HARDNESS ALLOY HUB & HIGH TENACITY
CARBEN BEARING & ROTATING FLEXIBLE
6" 7'' ATM Offroad Wheel Pneumatic Rubber All Terrain Mountain Wheels Kit With Two Belt For DIY Skateboard /Scooter
Regular price
Sale price$116.00
3 in stock
Spec :
7"ATM Offroad Wheel
Size:7'' ATM 175x50mm
Tire Width: 2''
Axle diameter:1/2"
Loading Capacity:120KG
Wheel bearing:608
Pulley bearing:6000RZ
Pulley Teeth: 66T
Belt:360mm,15mm Width
Bearing diameter: 8mm(Not applicable to 13.78/15.2 Inches Truck )
6"ATM Offroad Wheel
Size:6'' ATM 150x50mm
Tire Width: 2''
Axle diameter:1/2"
Loading Capacity:120KG
Wheel bearing:608
Pulley Teeth: 60T
Belt:335mm,15mm Width
Bearing diameter: 8mm(Not applicable to 13.78/15.2 Inches Truck)
Features:
STREET PROFILE/OFF-ROARD DESIGN & HIGH WEARABILITY
HARDNESS ALLOY HUB & HIGH TENACITY
CARBEN BEARING & ROTATING FLEXIBLE
Detail:
6374 190KV 3250W brushless belt motor for Electric Skateboard
Regular price$89.00
-3 in stock
The motor pulley come with random color 16mmwidth 16tooth.
Use for electric tricycle, electric scooter, toy scooter etc... High Quality, easy assemble. Fitment: Universal for electric bikes, scooters
Package Contents 1 x Foot Throttle
Aluminium Case for VESC V4.12 BLDC Motor Controller
Regular price
$39.00Sale price$20.00
74 in stock
Weight:128g
Texture: Aluminum
Colour:Black
CNC machined Aluminium T6 case for BLDC VESC V4.12 Case protects the board from dirt, dust and overheating. Case weights 128g (without board) dimensions :121mmx45mmx21.5mm
package size:20cm*15cm*4cm
The packaging contains: 1pc. Aluminium case 3 plastic Screws +4 metal Screws
Aluminum Alloy Propeller 3.5HP 3.5 HP Outboard Motor 2 Stroke For Flipsky 65161 Brushless Motor
Regular price$27.00
-52 in stock
Spec:
Material: Aluminum Alloy
Propeller model: 3X7 1/4"×5"
Anti spark Switch Smart Enhanced 120A for Electric Skateboard /Ebike/ Scooter/Robots
Regular price$32.00
-984 in stock
Spec:
Hardware: V2.2
Max voltage: 12S (50.4V)
Continuous Current: 60A , Max Current: 120A
Burst current: 800A(theoretical current)
Mosfets: NVMFS5C628NLs
LED button diameter:12mm, cable length: 250mm
PCB thickness:4 layers*3oz copper=12oz copper
PCB size: 40mm*32m
Wire:12AWG
Enhanced Features:
High Side Switching -> Much safer to use with multiple ESCs and other devices.
In-rush current limiting.
RC delay network restricts inrush current to safe levels.
dV/dt is ~100V/s (This is considered VERY slow for power electronics. Fast would be 50,000,000V/s). At 6,000 uF output capacitance, this is an inrush current of 600mA.
Smart Power on/off
Roll-to-start. Has 12 second blanking timer after turn off. Can still be turned on by switch during this period.
Auto-turn-off. Will turn off automatically after 20 minutes. The output voltage must vary by at least 500mV within any three second interval to reset the turn-off timer.
Support momentary push button. Hold for 0.3s to turn on, 1s to turn off. Holding it down will cycle it on then off.
High power, 150A Continuous.
Very low idle power draw, ~300uA, will last months on battery.
1.Preventing a small spark may cause explosions in some spark-sensitive areas.
2. Add copper bars for better heat dissipation and over-current flow.
3.Anodized aluminum Heatsink with lots of notches for better heat dissipation.
4.Add silicon glue to fix the LED button cable with the heat shrink.
Warnings:
Do not peel off the heat shrink.There’s no screw to lock the heatsink and PCBA. Only the heat-transfer silicon pad is naturally sticky to heatsink and PCBA.
No short circuit protection, DO NOT short circuit output!
No reverse polarity protection. DO NOT plug in backwards.
Recommended to keep output capacitance under 6,000 uF. Proper operation cannot be guaranteed at higher capacitances.
Do not Hot-Swap. Try to make sure everything is off before connecting and removing. If need be, unplug from battery first, wait for ESCs to turn off, then unplug ESCs. Do the reverse for plugging in, plug in ESCs first before plugging the switch into the battery.
Engineers have thoroughly tested prototypes; however, this is still a new design and a first production run, please exercise extreme caution (as one would normally do with any electric vehicle) when using this device.
Do not attempt to reprogram the MCU unless otherwise advised. Doing so will void any warranty and also put the switch at great risk of failure.
Wiring diagram:
BLDC Belt Motor 6354 190KV 2450W for Electric Skateboard