Spec:

• Model:63.0×L74.
• Shaft :Φ10
• KV: 140KV
• Volts: 8-16S
• Max Power: 3600Watts;Rated power:2400Watts.
• Max Current: 75 Amps;Rated current I/A:50Amps
• Insulation current AC500v/50Hz/1mA/3S
• Resistance R/mΩ :44.9
• Inductance L/uH 28.6
• Three-phase lead 3*12AWG (4.5mm)
• Plug: 4mm banana head (male) 
• Internal structure :12N/14P

Spec:

• Size: ∅ 65*150mm
• KV:160KV
• Voltage range: 4-13S
• Rated current: 30A;Maximum current:70A
• Insulation current:AC500v/1ma/3s
• Rated power:1500W;Maximum power:3000W
• Rated torque:2.3N.m;Maximum torque 4.5N.m
• Internal structure:12N/10p
• ESC drive mode:PPM
• Communication port: USB
• ESC driver firmware:5.2 vesc tool 3.00
• ESC support mode: BLDC/FOC
• Shaft specifications ∅ 12-0.005/-0.01
• Power cable: 2*12AWG(∅ 4.5mm*140)
• Power plug: XT90 male
• Weight:2.0kg

Spec:

• Model:FSESC 28120
• Processor:STM32G071
• Input voltage :DC 7V-33.6V（2-8S Lipos）
• Continuous current:120A
• Maximum current:150A
• Firmware:BLHeli_32 / AM32
• RGB LED Choices :Yes
• Cable Size:14AWG
• Programmable：Yes. Available for throttle calibration, timing angle setting, current detection, telemetry signal, motor rotation direction etc.

Spec:

• Model:FSESC 12100
• Processor:STM32G071
• Input voltage :18V-50.4V（5-12S Lipos）
• Continuous current:100A
• Maximum current:180A
• Firmware:BLHeli_32 / AM32
• BEC:NO
• Signal protocol:Dshot (All),PWM,Oneshot,Multishot,etc
• Programmable:Yes. (Available for throttle calibration, timing angle setting, current detection, telemetry signal, motor rotation direction etc.)
• RGB LED Choices:Yes

Product Description:

1. Adopt 32-bit high-performance processor STM32G071 with working frequency 64MHz and maximum motor PWM frequency 128KHz .
2. Adopt high-power MOSFETs and heatsink with good heat dissipation performance in high current.
3. Support multiple motion modes such as uni-direction, bi-direction with braking etc.
4. Support low voltage protection, temperature protection, locked rotor protection, current protection etc.
5. The ESC automatically detects the throttle signal when it is powered on, supports all Dshot signals, and also supports signal protocols such as PWM, Oneshot and Multishot.
6. Visual programming parameter adjustment tool supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings.
7. Onboard RGB LED color light settings, multiple LED colors can be customized.
8. Widely used in model airplane plant protection machines, multi-rotor drones, RC model ships and cars.

Spec:

• 1.8-inch super clear and big screen display
• Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information
• Be compatible with Flipsky FSESC/FTESC and other VESC and Non-VESC
• ESK8 mode / E-surf mode switching freely
• Esurf mode：Cruise speed control function
• Waterproof IP rating: IP67
• Bigger remote battery capacity:1500MA
• ESC failure report ：Detect possible failures of the ESC in time for replacing
• Controller mode: PPM/UART
• Charging way:Wireless Magnetic Charging
• VX3 Pro Remote comes with Receiver (support Flipsky non-vesc)
• Support online upgrade firmware

Feature:

1. Replace the communication module with SX1280;
2. The transmitter microcontroller is replaced with GD32F303CGT6;
3. Add FTESC ESC UART control protocol;
4. Add UART, PPM, UART&PPM control modes;
5. Function switching is changed to joystick up and down switching control;
6. Add gear lock function;
7. Add low battery alarm function for skateboards and surfboards;
8. Add total mileage display function;
9. The maximum wheel diameter can be set to 999mm;
10. Add the function of modifying the default gear at startup;
11. Add whether the cruise mode/reverse function is turned on and can be modified;
12. The maximum number of wheel gears can be set to 999mm;
13. Optimize the screen refresh frame rate and faster data refresh display.

Wiring Diagram: