Spec:

• Voltage range: 6-20S (25.2-84V)
• Max power: 3000W; Continuous power: 1500W
• Peak current: 70A; Continuous current: 30A
• Motor KV: 160KV
• Max spin speed(RPM): 8064
• Size: OD65*L111mm
• Shaft diameter: 10mm
• Motor pole: 6pcs; 3 pairs
• Motor stator slot: 12
• Waterproof rate: IP68
• Lead wires extension: 12AWGx1400mm

The thrust under the condition of reaching this voltage and current as below:

• 48.5V 2.7A 5KG
• 48.5V 8.2A 10KG
• 48.5V 18.2A 15KG
• 48.5V 20A 17KG
• 48.5V 25A 19KG
• 48.5V 30A 21KG
• 48.5V 35A 23KG

Drawing:

Remark: This product will not come with cable . 

Features:

• Type: Underwater Propeller Motor
•  Motor dimension: 50*85mm
• Waterproof level:IP28 grade waterproof
• Poles：28（please write 14 pairs when do setup)
• Max torque:1.5NM
• Weight:1.51b/0.68kg

Rerference information:

Features:

• Waterproof level:IP28 grade,it can work underwater.
• Material :316 stainless steel shaft

Spec:

• Maximum power:410W
• Motor diameter: 46mm
• Motor length: 50mm
• Mounting distance: 28mm
• Shaft diameter: 4.85mm
• Poles：28（please write 14 pairs when do setup)
• Torque: 0.9N.m
• Prop mounting distance: 25mm
• Weight:310g

What is the advantage of F4125：

1. Anti-corrosion, can be used in sea water.
2. IP28 grade waterproof, It can work underwater.

Features:

• KV:160KV
• Max Volts:12S
• Rated voltage:24V
• No-load current:＜ 1A
• Maximum load current:30A
• Rated power :500W
• Motor dimension: 50*62mm
• Poles：14（please write 7 pairs when do setup)
  
• Thrust ：5KG
• Current:12A
• Hole distance:φ 35
• Screw holes:4×M4
• Waterproof Level :IP68
• Motor wire: 12AWG

What is Advantages of Flipsky 5062 motor:

• Applying high thermal conductive material into the vacuum glue sealing coil for waterproof treatment, which can protect the copper wire and silicon steel sheet from seawater corrosion effectively.
• Adopting special stainless steel bearing and lubricating grease. Salt spray test can reach 144 hours.
•  The upper and lower positions of the magnets have the rings to lock the magnets and prevent the magnet from falling off.
• The motor shaft is made of 316 stainless steel, which can work in seawater for a long time.
•  The solder joints of the motor leads are potted inside the motor, which can meet the 200m suppression test.

Spec:

• Voltage range: 6-20S (25.2-84V)
• Max power: 3700W; Continuous power: 2000W
• Peak current: 100A;
• Motor KV: 130KV
• Size: OD65*L121mm
• Shaft diameter: 12mm*m8
• Max output torque:5.5N*M
• Waterproof rate: IP68
• Connectors:8mm plug
• Weight:1.62KG
• Structure:18N/P
• Lead wires extension: 8AWGx1400mm

ROUND WITH THREAD MOTOR DRAWINGS：

SPLINED SHAFT MOTOR DRAWINGS: