flipsky_esc_tool  software and manual download link

Spec:

• Firmware: V1.3 or above (firmware update via Flipsky ESC Tool supported)
• Voltage: 14V-84V (safe for 4S-20S)
• Continuous current: 50V/550A; 75V/450A (Values depend on the mounting, ambient temperature
• and air/water circulation around the device!);
• Peak Current: 1000A
• BEC:5V@1A
• Motor/power Wire Size:8 AWG (3pcs combine)
• Programmable Tool: Flipsky ESC TOOL
• PWM Frequency Control: YES
• Multiple Speed Gear Limit Control:YES (UART / ADC)
• Regenerative Capacity: Yes
• Communication Ports: USB, CAN, UART, PPM, ADC
• Input Signal Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro
• only at present, it will be compatible with more remote controllers soon)
• Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored)
• Multiple Speed Gear levels: Low, Medium, High, Reverse
• Switch Support: Power on/off button switch or key switch
• Size: L227.5*W140*H54mm(with water cooling enclosure)

Features:

1. Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.
2. 240MHz and the max PWM switching frequency 45KHz, which improves the motor RPM.
3. Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different
4. batteries voltages and many control ways.
5. Programmable via Flipsky VX4 remote (Firmware Version:VX4_V1.2.1or above)
6. Supporting FOC with low working noise and smooth starting.
7. Supporting Real-time data and fault alerts.
8. Supporting adaptive variable PWM frequency control.
9. Supporting sensor mode(HALL) and sensorless modes (IPDS, HFPI).
10. Supporting control types: Current, Duty Cycle.
11. Protection functions: low and high voltage protection, motor over-temperature protection (suitable
12. for NTC-10K-25℃ temperature sensing resistance only), battery over discharge protecting,
13. mosfets over current and over-temperature protection.

Spec:

• Size: ∅ 65*150mm
• KV:160KV
• Voltage range: 4-13S
• Rated current: 30A;Maximum current:70A
• Insulation current:AC500v/1ma/3s
• Rated power:1500W;Maximum power:3000W
• Rated torque:2.3N.m;Maximum torque 4.5N.m
• Internal structure:12N/10p
• ESC drive mode:PPM
• Communication port: USB
• ESC driver firmware:5.2 vesc tool 3.00
• ESC support mode: BLDC/FOC
• Shaft specifications ∅ 12-0.005/-0.01
• Power cable: 2*12AWG(∅ 4.5mm*140)
• Power plug: XT90 male
• Weight:2.0kg

Spec:

• Model:FSESC 28120
• Processor:STM32G071
• Input voltage :DC 7V-33.6V（2-8S Lipos）
• Continuous current:120A
• Maximum current:150A
• Firmware:BLHeli_32 / AM32
• RGB LED Choices :Yes
• Cable Size:14AWG
• Programmable：Yes. Available for throttle calibration, timing angle setting, current detection, telemetry signal, motor rotation direction etc.

Spec:

• Model:FSESC 12100
• Processor:STM32G071
• Input voltage :18V-50.4V（5-12S Lipos）
• Continuous current:100A
• Maximum current:180A
• Firmware:BLHeli_32 / AM32
• BEC:NO
• Signal protocol:Dshot (All),PWM,Oneshot,Multishot,etc
• Programmable:Yes. (Available for throttle calibration, timing angle setting, current detection, telemetry signal, motor rotation direction etc.)
• RGB LED Choices:Yes

Product Description:

1. Adopt 32-bit high-performance processor STM32G071 with working frequency 64MHz and maximum motor PWM frequency 128KHz .
2. Adopt high-power MOSFETs and heatsink with good heat dissipation performance in high current.
3. Support multiple motion modes such as uni-direction, bi-direction with braking etc.
4. Support low voltage protection, temperature protection, locked rotor protection, current protection etc.
5. The ESC automatically detects the throttle signal when it is powered on, supports all Dshot signals, and also supports signal protocols such as PWM, Oneshot and Multishot.
6. Visual programming parameter adjustment tool supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings.
7. Onboard RGB LED color light settings, multiple LED colors can be customized.
8. Widely used in model airplane plant protection machines, multi-rotor drones, RC model ships and cars.

Spec:

• 1.8-inch super clear and big screen display
• Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information
• Be compatible with Flipsky FSESC/FTESC and other VESC and Non-VESC
• ESK8 mode / E-surf mode switching freely
• Esurf mode：Cruise speed control function
• Waterproof IP rating: IP67
• Bigger remote battery capacity:1500MA
• ESC failure report ：Detect possible failures of the ESC in time for replacing
• Controller mode: PPM/UART
• Charging way:Wireless Magnetic Charging
• VX3 Pro Remote comes with Receiver (support Flipsky non-vesc)
• Support online upgrade firmware

Feature:

1. Replace the communication module with SX1280;
2. The transmitter microcontroller is replaced with GD32F303CGT6;
3. Add FTESC ESC UART control protocol;
4. Add UART, PPM, UART&PPM control modes;
5. Function switching is changed to joystick up and down switching control;
6. Add gear lock function;
7. Add low battery alarm function for skateboards and surfboards;
8. Add total mileage display function;
9. The maximum wheel diameter can be set to 999mm;
10. Add the function of modifying the default gear at startup;
11. Add whether the cruise mode/reverse function is turned on and can be modified;
12. The maximum number of wheel gears can be set to 999mm;
13. Optimize the screen refresh frame rate and faster data refresh display.

Wiring Diagram:

Specs:

• Material:Nylon
• Diameter: ∅120mm
• Pitch: 96mm
• Suitable For Flipsky 65111 motor