Please use 5V/2A charger for VX4 (Max. Input voltage of 6.5VDC for VX4). Do NOT use a charger with an output voltage more than 6.5V, otherwise the VX4 remote controller may be damaged.

Note: USB cable black or white will be shipped randomly.

Flipsky_VX4_V1.3 firmware and manual download link:

https://1drv.ms/f/s!AuAZ7-jVkATniFx-EsbSy96gMQzm?e=reNzEa

Feature:

• Color screen(240*240 circular high-brightness LCD screen)
• Option choice for km/h and miles/h
• Option choice for FSESC and other VESC( FOCBOX)
• Use Sx1280 chip,which is based on Loraspread spectrum modulation technology,it has up to 13dB of co-channel rejection.
• Support PPM,Uart,ppm and uart mode.
• Support Remote and receiver upgrade.
• Support 3 speed modes(Default H--high speed)
• Support cruise control mode
• Remote and E-skateboard power indication lights
• Rechargeable Li-ion Battery:1200mAh
• Wrist strap
• VX4 remote comes with receiver

Wiring Diagram:

Detail:

Shipping package:

1pcs VX4 remote

1pcs Uart cable

1pcs PPM cable

1pcs USB TypeC cable

1pcs Manual

Reference video：

Remark:

1.all these parts in the kit are unassembled when shipment.

2.this All Terrain kit come without motors, it can suitable for flipsky 63 series Motors,recommend motor:6384/6374 /63100 etc . (If you need other KV values, please leave order notes, otherwise 190KV will be sent by default)

Truck:

• Truck Length: 420mm / 16.5''
• Axle Length: 60MM / 2.4''
• Axle Diameter: 10MM

Others：

• hub material: Aluminium Alloy
• Tyre Material: Rubber
• Axle Hole Size:10 mm
• Tyre Pressure: 60PSI 410kpa
• HUB Axle Diameter: 10 mm
• HUB Teeth: 72 teeth
• Pulley teeth:16T HTD5M
• Gear ratio:  72:15
• Belt:445 mm length,15mm width

Detail size:

Package included:

Features:

• Max Speed: 35 KM/H( 21.7 MPH)
• Deck : 8 Layers Maple
• Charging Time : 4-5h
• Battery: Samsung 6.0Ah
• Voltage: 42V
• Motor Power: 600W*2
• Wheels: 90*54mm PU Wheels
• Hill Climbing: 15-20%
• N.W.:7.4KG
• G.W.: 9.7KG
• Range: 20-25KM (Average speed) 15-18KM(High speed)
• Max load : 280 pounds (150 kg), recommending riding weight is 264 pounds(120 kg) and below
• Remote: Smart LCD remote with 4 speed modes
• Size : 37.4"*10.6"*5.1”( 950*270 *130mm )

The advantages of  Flipsky F1 Electric Skateboard :

1. Samsung battery: brand battery with small internal resistance, large discharge capacity and low heat generation, which is reliable and durable performance.
2. Smart slide/roll to turn on start; auto-turnoff after 5 minutes no work .
3. Good stability: 8 layers of maple deck used, which has good elasticity and break-resistant. The perfect combination of trucks and 90mm PU wheels creates a comfortable sliding experience.
4. Smart LCD remote controller: speed, battery, and range etc, visible to see all the data you need.
5. The 4 speeds of the remote control are available for users to choose: high, medium and low, and the sports gear accelerates and reacts faster .

About shipping:

• Free shipping of this product 
• By air it takes about 10-18days arrival ;by sea it takes about 25-60 days arrival .

Reference video:

Mini Size Dual FSESC6.6 Based upon VESC6 with Aluminum Heatsink

Warm tips: please do not remove the shrink to protect the pcb electronics components from impurities or metals which result in short circuit or esc burnt damage.

It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC

1. Dual ESC can reach continuous 200A big current, give your board strong power
2. One PCBA board integrate two FSESC6 ’s function by internal CAN BUS circuit connection.
3. The mater and slave board connection can be switched On/Off
4. Preserve Bluetooth module and RF module connections for both master and slave board
5. Aluminum anodized Heat sink with fins design for better heat dissipation
6. size with heatsink: 81x77x20mm 
7. PCB layers: 8layers, thickness: 3oz/layer, total 24 oz thickness

Spec:

• Hardware: V 6.6
• EPRM:150000
• Firmware: Latest firmware version
• Voltage: 8V - 60V (Safe for 3S to 12S LiPo) for the dual ESC
• Voltage spikes may not exceed 60V
• Current: Continuous 100A single, total 200A ,  Instantaneous current 400A per single, total 800A for system instantaneous current.
• 5V 1.5A output for external electronics for single
• 3.3V 1A output for external electronics for single
• Modes: DC, BLDC, FOC (sinusoidal)
• Supported sensors: ABI, HALL, AS5047
• 6 shunts in dual system. Each is measurable for the current.
• Motor wire: 12AWG
• Power cable: 8AWG

Reminder: 1. Detected battery voltage tolerance: +/-0.6V   

                   2. This version does support setup for 4WD.

The shipping package contains:

• 1*Dual FSESC6.6+Heatsink
• 2*VESC Sensor Wires
• 1*Micro USB
• 1*Manual

Details for Mini Size Dual FSESC6.6     

Wiring diagram:

Other Features:

• Regenerative braking
• Traction control (single and dual settings)
• Sensor or sensorless operation
• Configurable RPM, Current, Voltage and Power Limits
• Input source: PPM, simulation, NRF Nyko Kama Nunchuck
• Communication ports: USB, CAN, UART, NRF, Bluetooth
• Throttle curves and ramps for all input sources
• Separate acceleration and brake throttle curves
• Motor speed, ampere hours, watt hour count,Instant data analysis and reading via communication port
• Voltage and current protection setting for Motor and ESC 

 Program Tutorial in VESC Tool 1.16

Spec:

• Hardware Version:ODESC4.0/4.1 Single Drive
• PCB layer Number:ODESC4.0/4.1 4 layer*2
• Applicable Voltage: ODESC4.0 8-24V;V4.1 8-56V
• Current Parameter:50A continuous/120A peak
• Support Encoder:Incremental Encoder, Absolute Encoder, Houle Sensor, AMT102, AMT103, TLB5012, AS5047
• Communication Interface:USB-Protocol Open Source (PC, Raspberry Pie, Ros) , UART (Embedded Devices) , PWM (RC Remote) ,STEP/DIRECTION（PLC）、GPIO、CAN、ANALOG INPUT
• Voltage Protection:Programmable Voltage Protection to Prevent Excessive Battery Discharge
• Movement Pattern:Speed Mode, Torque Mode, Current Mode, Position Mode, Trajectory Mode, etc.

Feature:

The ODESC high performance brushless driver is based on the open source project ODrive hardware optimization enhancement, stable performance, and match the original Odriver firmware. The USB connected PC terminal can realize motor debugging and complicated multi-axis control, and can realize FOC control for most brushless motors. With the use of encoder, it can also realize any torque, speed loop, position loop, current loop, and position control based on trajectory planning, can be widely used in flexible robot joints, robotic arms, 3D printing, camera universal joints, pan rail, CNC milling machines, ship models, car models and other DIY, industrial and automation fields.

Wiring Diagram:

ODESC4.0/4.1

Warm Tips: Support custom KV value, round shaft pulley will default come with 16T pulley/D shaft will come with 15T,please leave order notes if you have any requirements,thanks.

Spec:

• Weight: 1.4KG
• Max Power: 5500W
• Motor KV: 190/170/140KV
• Max. current: 100A
• Battery type: 4-14S (4-12S is safe for 190KV)
• Recommend ESC: VESC6
• Max Torque: 10Nm (in a very short time, no more than 30S)
• Diameter(mm): 63
• Length(mm): 100
• Total length (mm):130mm(including 8mm round shaft) / 125mm(including 10mm D shaft)
• Shaft(mm): 8mm/10mm
• Bullet connector: 4mm
• Hall sensor connector: 6-pin JST-PH
• High efficiency within 8000rpm, no more than 10000rpm 

Detail:

10MM D Shaft Motor Drawings：

8MM Round Shaft Motor Drawings：

10MM Round Shaft Motor Drawings：

Reference video: