Brand new and high quality Connect RC battery to electronic equipment Low resistance and gives the best electric flow PERFECT For RC Drones, Helicopters, Planes, Cars & Trucks Diameter: 4mm Quantity: 1 Pairs = 1 Male & 1 Female
Bluetooth Module 2.4G Wireless Based upon the nrf51_vesc project
-666 in stock
Based upon the nrf51_vesc project
Kindly Reminder: This bluetooth module can only support Android mobile device.
Used to communicating between the VESC and VESC Tool (mobile) over BLE. Note that the UART port on the VESC must be enabled with a baud rate of 115200 for this to work. The UART port on VESC can work only under 115200 baud
Operating voltage: 2.0V ~ 12V Onboard Chip: NRF51822 Actual use distance: The distance to communicate with VESC is about 15 meters Frequency range: 2.4GHz 2.4 GHz multiprotololl RF receiver ARM Cortex-M0 32 bit processor 256kB flash & 16kB RAM PCB size：27mm*13mm 2.0mm seven-pin four-wire connector length：90mm Antenna length：145mm net weight：3.5g
Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. The XT90 offers a tight fit, ensuring a solid connection for minimal resistance. This means that more power gets from your pack to your power system when compared to other plugs currently on the market. Don't starve your high-amp power system, switch to XT90 connectors today!
Plug Type: Male / Female
Current Handling: 90A+ (constant)
Weight: Male plug: 8g / Female plug: 8g
XT60 Male & Female AMASS Connectors Plugs 10 Pairs
-241 in stock
Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.
140MM Electric Skateboard Trucks for Hub Motor
-14 in stock
• Truck Length - 10.67" or 271mm (including axles) • Hanger Length - 5.5" or 140mm (not including axles, only hanger space) • Axle - 58.85mm Length, 8mm Diameter Axle - 10mm Thread Length - 48.85mm Usable Axle Length
• 140MM Truck for Hub motor
• 1*Truck • 1* pad • 4* bolt
204MM Electric Skateboard Truck Set (Front and Back)
-40 in stock
Aluminum forged truck Spec:
Total Length: 271mm The body length: 204mm the axletree length:33.5mm the axletree diameter: 8mm
Full Truck set including: 2 x Baseplates 1 x Front hanger 1 x Rear Dual Motor Hanger 8 x Mount nuts & bolts
(The 95A bushings and Kingpin nuts already assembled in the trucks)
Aluminium Case for VESC V4.12 BLDC Motor Controller
103 in stock
CNC machined Aluminium T6 case for BLDC VESC V4.12 Case protects the board from dirt, dust and overheating. Case weights 128g (without board) dimensions ：121mmx45mmx21.5mm
The packaging contains: 1pc. Aluminium case 3 plastic Screws +4 metal Screws
Electric Skateboard Belt Motor Mount Set For 83/90/97MM Wheel
-138 in stock
Description: Transmission is accurate, no slip at work, with a constant transmission ratio. Smooth transmission, with a buffer, shock absorption capacity, low noise. Easy maintenance, no lubrication, low maintenance costs. Bracket structure design fixed hole position can be adjusted motor 4 fixed screw position, thereby adjusting the size of the belt between the synchronous wheel elastic.
Supported Truck :18mm diameter hangger
Specification: Color: Black Material: Surface oxidation+stainless steel Gear of wheel: 35 tooth Gear of motor: 16 tooth Bore of wheel: 21mm Bore of motor: 8mm/10mm (support motor shaft :8mm / 10mm) Round hole diameter of motor mount: 18mm Motor mount width: 14mm Motor mount length: 131mm Belt width: 11mm Belt length: 270mm Bore of Fixing Plate: 26mm Length of Fixing Plate: 47mm Bolt of the wheel: 7
1 X Pulley For Wheel 1 X Pulley For Motor 1 X Fixing Plate 1 x Bracket 1 X Belt 7 X Bolts 2 X L-key 12 X Screws
2.4G Nano Remote Controller for Electric Skateboard
-200 in stock
1. Support 2 Speed mode: Up high speed (1.5-2) & Down low speed (1.5-1.7)
2. Alert light: Green: Low voltage alert and connection lost alert(binding alert) &
Red: High-charging indication
3. Expand module switch: second channel for adding light or speaker (Not support so far)
4. Reverse switch: to change forward and backword direction
This remote controller is compatible with VESC and FSESC series products, while the reverse function is useless.
Every time power on the remote controller, it will automatically match with your eskateboard!
2.4Ghz Remote VX1 for DIY electric skateboard
-31 in stock
2.4Ghz band width
Support 3 speed modes
Support cruise control mode
Remote and E-skateboard power indication lights
Support checking remote battery volume
Comfort touch: ABS+Rubber painting surface
Rechargeable Li-ion Battery
VX1 Remote comes with Receiver
Kindly Reminder !
1.Please carefully check following receiver connection diagram corresponding with different FSESC, wrong cable collection in reciver side will cause the receiver burned.
2. The variants (for VESC4/ for VESC6 / For Non VESC) only differenciate on reciver cables , the remote is the same one.
3. When you choose UART mode connection for VX1 remote receiver, pls do connection after your programming in VESC tool. Or else , it will influence programming. And In UART mode, there is no need to do adjust for remote.
Receiver Connection Diagram
For Single V4
For Dual FSESC4.20: Both hook up with bluetooth and remote receiver
For Single V6
For Dual FSESC6.6 Plus : both hook up with bluetooth and remote receiver