Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
Automotive grade monitoring & balancing IC with separate power supply for increased reliability
Voltages measurements for load, charger & battery pack
Bi-directional current monitoring
SOC based on coulomb counting
Humidity sensor & board temperature monitoring
Charger detection circuit
Integrated precharge circuit
Power button, USB-C, UART, I2C & isolated CAN bus interface
On board High-Efficiency 3.3V regulator powered from the main battery pack
High current capacity automotive grade screw connectors for main power connections
Buzzer & status LED
Support overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
Support almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.
Electric Skateboard T Tool Black
-112 in stock
This is a skate tool with a hidden hex/phillips-head screwdriver built inside. You can tighten up any loose parts or fix your skateboard on-the-go!
Includes: T tool comes with a hex head in 3 sizes: H9.5, H13, or H14.
SQ-A110 110W Electric Solder Iron Intelligent Constant Temperature 100-500°C/212-932°F Antistatic
-34 in stock
Temperature range: 100-500 ° C (212-932 ° F)
Power supply: 220V 50Hz / 110V 60Hz
Grounding impedance of welding nozzle: < 2 Ω
Ground voltage of welding nozzle: < 2mv
Dimension (about): 236mm (length) x 23.6mm (maximum diameter) / 9.29in (length) x 0.93in (maximum diameter)
The advantage of the SQ-A110
Small size, three key design, powerful function.
Fast temperature recovery, heating speed 8 seconds.
High quality heating body, high platinum temperature sensitivity.
Two display temperature modes (Celsius, Fahrenheit).
With sleep function to save energy and LED indicate sleep state.
Microcomputer temperature compensation value, temperature error less than plus or minus 5 degrees.
High insulation, soft touch power cord.
Digital display, clear content at a glance.
Memory mode function.
Handle is made of special high temperature resistant material and ESD anti-static treatment.
Equipped with black diamond solder tip, it has strong tin loading capacity and fast heat transfer speed.
Reminder: It is a normal phenomenon that the first use of Electric Soldering Iron may cause smoke,because there flux at the heat of the electric soldering iron .the first use will smoke,not a quality problem.
1 x SQ-A110 Intelligent constant temperature electric soldering iron
(optional 220v European and 110v American plugs)
1 x Instructions
1 x Thick large 900M-T-K
1 x Metal soldering frame
SQ-001 Upgraded | Mini Smart portable 65W soldering iron | DC 12-24V power supply| SQ-001 electric soldering iron
31 in stock
Model name: SQ-001
Color: Black, Blue
Temperature range: 100-400 °C / 212-752°F
Factory default temperature: 300 °C / 572°F
Power supply: DC 12-24V 5.5 * 2.5mm standard interface
Preset temperature 300℃(Initial setup)
Power saving temperature 200℃(Initial setup)
Operating voltage Power The fastest time to heat up
12V 17W 40s
16V 30W 20s
19V 40W 15s
24V 65W 11s
Universal interface expand the scope of application
Super Light weight & mini size (with iron tips assembled): 31g / 172mm
Multiple choice of power supply
The Advantage of Upgraded Version SQ-001
MINI SQ-001 Electric soldering iron is an upgraded version of internal heat intelligent numerical control soldering iron. Lightweight design, easy to install and use, easy to remove and store, comfortable control handle, high-efficiency heating end, simple control interface. It is a favorite tool for electronic engineers and electronic maintenance enthusiasts.
It can work in DC 12-24V, OLED screen display, key temperature adjustment, external independent power supply. In DC 19V 40W state, 15 seconds temperature rise to 300 ℃.
SQ-001 intelligent temperature control between 100-400 degrees, more stable temperature, instantaneous temperature rise, automatic sleep, over temperature alarm and other functions
The heating end adopts internal heating core
Temperature stability range: ± 2%
External independent power supply: DC 5525 power interface, suitable for DC 12-24v notebook power supply, vehicle power supply and mobile power supply.
Micro USB interface: set temperature rise curve, user defined function key and firmware upgrade function through parameter file.
Additional functions: application layer open source design. You can change the internal parameter settings according to your own needs to meet more and more performance needs of different customers.
Package includes :
1x SQ-001 Controller
1x Solder Tip
1x Safety Instructions
1x Hex Key
1x User Manuel
1x DC5525 XT60 Power Cable
1x Mini- bakelite Stand Holder
SQ-D60 MINI Electric Soldering Iron|12-24V Digital Display Portable Intelligent Constant Temperature
12 in stock
SQ-D60A (Note: LED version, below referred to as “A version”)
SQ-D60B(Note: Digital tube version, below referred to as “B version”)
Temperature stability range: ± 5 ℃
Power supply: DC12-24V ,Type-C interface
A version: 280 ℃, 350 ℃ ,400 ℃（choices）
B version: 100-400 ℃ (Adjustable)
Operating voltage Power The fastest time to heat up
12V 17W 100s
16V 30W 40s
19V 40W 22s
24V 60W 13s
The Advantage of SQ-D60A/SQ-D60B
The SQ-D60 is equipped with a SQ-001 soldering iron head and uses TYPE-C power supply, “A section” LED display and “B section” digital tube display.
SQ-D60 with humanized functions such as automatic sleep shutdown, induction wake-up, etc., it is a portable intelligent constant temperature electric soldering iron.
The operation is simple and easy, the temperature rises quickly and stably, and the round and small body is full of simplicity and luxury. It is an essential welding tool for electronic players.
SQ-D60 adopts integrated TYPE-C power supply interface. The circuit design is stable and safe. The built-in STM32 processor, dual temperature sensor and motion sensor are the perfect combination to make SQ-D60 freely switch between various temperature ranges. Wake-up, over-temperature and high-pressure alarm, etc., truly realize intelligent intelligent constant temperature electric iron.
SQ-D60 Comparison of soldering iron differences
default 10 min (no adjustable)
Please use proper power supply and accessories to ensure safe use.
Before replacing the soldering iron head, you must cut off the power.
Do not touch the tip of the soldering iron after the temperature has risen to avoid burns.
The electric soldering iron is used for the first time. It may be slightly smoked due to the heating of the heating element. This is normal.