Spec:
Size: 16cm*9cm
Weight: 150G
Applicable Model: MAX G30,Suitable for VESC series ESC ADC control
Socket :ZH1.5 MM 3P Female
You may also like
Firmware & software repositories are available click here:Github page.
Spec:
- Cell voltage operating range:2V-5V
- Recommended series cell:6S-12S
- Charge / discharge voltage:24V-52V
- Charge Current：≤20A
- Abs. Max battery voltage: 60V
- Minimum operating voltage: 14V
- Continuous charging current: 20A
- Over charge detect and release voltage: 2V-5V
- Over charge protection delay: ≥4ms
- Discharge current: ≤70A
- Max. Continuous discharge / regen current: 70A
- Over discharge detect / release voltage: 0-5V
- Over current detect delay:≥4ms
- Discharge over current protection release condition: off load
- Short Circuit detect voltage:short circuit of external load
- Short Circuit detect delay: 320us
- Short Circuit protection release: off load
- Battery pack capacity and internal resistance detection: Yes
- Balance current: 86mA @4.2V
- Temp Protect: -20℃—+120℃
- Working Temp Range:-20℃—+80℃
- Storage Temp Range: -20℃—+100℃
- Working current: ≤40mA
- Sleeping current: ≤100uA
- Size: 89 x 40 x 20.8mm
- Net weight: 106.5g
- Packing size: 140 x110 x 50 mm
- Package weight: 303.5g
- Including outer carton size: 170*120*100mm
- Weight with outer carton: 380g
Feature:
- Compact layout and mini
- Using aluminum alloy material shell, better heat dissipation.
- Automotive grade design, automotive grade locking connector.
- Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
- Automotive grade monitoring & balancing IC with separate power supply for increased reliability
- Voltages measurements for load, charger & battery pack
- Bi-directional current monitoring
- SOC based on coulomb counting
- Humidity sensor & board temperature monitoring
- Charger detection circuit
- Integrated precharge circuit
- Power button, USB-C, UART, I2C & isolated CAN bus interface
- On board High-Efficiency 3.3V regulator powered from the main battery pack
- High current capacity automotive grade screw connectors for main power connections
- Buzzer & status LED
- Support overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
- Support almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.
Video:
Firmware & software repositories are available click here:Github page.
Spec:
- Cell voltage operating range:2V-5V
- Recommended series cell:18S-24S
- Charge Voltage:48V-104V
- Charge Current：≤10A
- Abs. Max battery voltage: 120V
- Minimum operating voltage: 28V
- Continuous charging current: 10A
- Over charge detect and release voltage: 2V-5V
- Over charge protection delay: ≥4ms
- Discharge current: ≤70A
- Max. Continuous discharge / regen current: 70A
- Discharge voltage:48V-104V
- Over discharge detect and release voltage: 0-5V
- Over current detect delay:≥4ms
- Discharge over current protection release condition: off load
- Short Circuit detect voltage:short circuit of external load
- Short Circuit detect delay: 320us
- Short Circuit protection release: off load
- Battery pack capacity and internal resistance detection: Yes
- Balance current: 50mA @4.2V
- Temp Protect: -20℃—+120℃
- Working Temp Range:-20℃—+80℃
- Storage Temp Range: -20℃—+100℃
- Working current: ≤40mA
- Sleeping current: ≤100uA
- Size: 109 x 40mm
- Net weight: 126.7g
- Packing size: 140 x110 x 50 mm
- Package weight: 370.3g
- Including outer carton size: 170*120*100mm
- Weight with outer carton: 420g
Feature:
- Compact layout and mini
- Using aluminum alloy material shell, better heat dissipation.
- Automotive grade design, automotive grade locking connector.
- Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
- Automotive grade monitoring & balancing IC with separate power supply for increased reliability
- Voltages measurements for load, charger & battery pack
- Bi-directional current monitoring
- SOC based on coulomb counting
- Humidity sensor & board temperature monitoring
- Charger detection circuit
- Integrated precharge circuit
- Power button, USB-C, UART, I2C & isolated CAN bus interface
- On board High-Efficiency 3.3V regulator powered from the main battery pack
- High current capacity automotive grade screw connectors for main power connections
- Buzzer & status LED
- Support overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
- Support almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.
Video:
Specs:
- Recommended nickel strips: 0.1-0.2mm
- Menu display: 1.8 inch color LCD
- Working mode: automatic/manual
- Built-in battery: 10000mAh
- Shell material: aluminum alloy
- Thickness of soldering pen wire: 8AWG
- Cycle charging: support
- Protection reminder: support
- Firmware upgrade: support
- Automatic shutdown: support
- Power display: support
- Temperature detection: support
This is a skate tool with a hidden hex/phillips-head screwdriver built inside. You can tighten up any loose parts or fix your skateboard on-the-go!
Includes:
T tool comes with a hex head in 3 sizes: H9.5, H13, or H14.
Spec:
- Model: SQ-A110
- Max Power:110W
- Temperature range: 100-500 ° C (212-932 ° F)
- Power supply: 220V 50Hz / 110V 60Hz
- Grounding impedance of welding nozzle: < 2 Ω
- Ground voltage of welding nozzle: < 2mv
- Dimension (about): 236mm (length) x 23.6mm (maximum diameter) / 9.29in (length) x 0.93in (maximum diameter)
The advantage of the SQ-A110
- Small size, three key design, powerful function.
- Fast temperature recovery, heating speed 8 seconds.
- High quality heating body, high platinum temperature sensitivity.
- Two display temperature modes (Celsius, Fahrenheit).
- With sleep function to save energy and LED indicate sleep state.
- Microcomputer temperature compensation value, temperature error less than plus or minus 5 degrees.
- High insulation, soft touch power cord.
- Digital display, clear content at a glance.
- Memory mode function.
- Handle is made of special high temperature resistant material and ESD anti-static treatment.
- Equipped with black diamond solder tip, it has strong tin loading capacity and fast heat transfer speed.
It is a normal phenomenon that the first use of Electric Soldering Iron may cause smoke,because there flux at the heat of the electric soldering iron .the first use will smoke,not a quality problem.
Package included:
1 x SQ-A110 Intelligent constant temperature electric soldering iron
(optional 220v European and 110v American plugs)
1 x Instructions
1 x Thick large 900M-T-K
1 x Metal soldering frame
Model:SQ-D60A/SQ-D60B
- SQ-D60A (Note: LED version, below referred to as “A version”)
- SQ-D60B(Note: Digital tube version, below referred to as “B version”)
- Temperature stability range: ± 5 ℃
- Power: 60W
- Power supply: DC12-24V ,Type-C interface
Temperature range:
- A version: 280 ℃, 350 ℃ ,400 ℃（choices）
- B version: 100-400 ℃ (Adjustable)
Technical Parameters:
Operating voltage Power The fastest time to heat up
12V 17W 100s
16V 30W 40s
19V 40W 22s
24V 60W 13s
The Advantage of SQ-D60A/SQ-D60B
- The SQ-D60 is equipped with a SQ-001 soldering iron head and uses TYPE-C power supply, “A section” LED display and “B section” digital tube display.
- SQ-D60 with humanized functions such as automatic sleep shutdown, induction wake-up, etc., it is a portable intelligent constant temperature electric soldering iron.
- The operation is simple and easy, the temperature rises quickly and stably, and the round and small body is full of simplicity and luxury. It is an essential welding tool for electronic players.
- SQ-D60 adopts integrated TYPE-C power supply interface. The circuit design is stable and safe. The built-in STM32 processor, dual temperature sensor and motion sensor are the perfect combination to make SQ-D60 freely switch between various temperature ranges. Wake-up, over-temperature and high-pressure alarm, etc., truly realize intelligent intelligent constant temperature electric iron.
SQ-D60 Comparison of soldering iron differences |
|||
NO. |
Contents |
A version |
B version |
|
1 |
Working temperature |
280℃，350℃，400℃（choices） |
100℃-400℃（Adjustable） |
|
2 |
Display screen |
LED |
Digital Tube |
|
3 |
Sleep time |
default 10 min (no adjustable) |
1-30min（Adjustable） |
|
4 |
Temperature compensation |
no |
±50℃（Adjustable） |
|
5 |
Temperature unit |
℃ |
℃ |
|
6 |
Factory temperature |
280℃ |
300℃ |
|
7 |
Picture |
 |
 |
Safety instructions:
- Please use proper power supply and accessories to ensure safe use.
- Before replacing the soldering iron head, you must cut off the power.
- Do not touch the tip of the soldering iron after the temperature has risen to avoid burns.
- The electric soldering iron is used for the first time. It may be slightly smoked due to the heating of the heating element. This is normal.
Packing Information:
1 x Mainframe
1 x Soldering Iron Tip (K)
1 x Conversion Line
1 x Instruction Manual
1 x Soldering Iron Stand
1 x Hex Key
1 x XT60 Power Cable
