Firmware & software repositories are available click here:Github page.

Spec:

• Cell voltage operating range:2V-5V
• Recommended series cell:6S-12S
• Charge / discharge voltage:24V-52V
• Charge Current：≤20A
• Abs. Max battery voltage: 60V
• Minimum operating voltage: 14V
• Continuous charging current: 20A
• Over charge detect and release voltage: 2V-5V
• Over charge protection delay: ≥4ms
• Discharge current: ≤70A
• Max. Continuous discharge / regen current: 70A 
• Over discharge detect / release voltage: 0-5V
• Over current detect delay:≥4ms
• Discharge over current protection release condition: off load
• Short Circuit detect voltage:short circuit of external load
• Short Circuit detect delay: 320us
• Short Circuit protection release: off load
• Battery pack capacity and internal resistance detection: Yes
  
• Balance current: 86mA @4.2V
• Temp Protect: -20℃—+120℃
• Working Temp Range:-20℃—+80℃
• Storage Temp Range: -20℃—+100℃
• Working current: ≤40mA
• Sleeping current: ≤100uA
• Size: 89 x 40 x 20.8mm
• Net weight: 106.5g
• Packing size: 140 x110 x 50 mm
• Package weight: 303.5g
• Including outer carton size: 170*120*100mm
• Weight with outer carton: 380g

Feature:

• Compact layout and mini
• Using aluminum alloy material shell, better heat dissipation.
• Automotive grade design, automotive grade locking connector.
• Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
• Automotive grade monitoring & balancing IC with separate power supply for increased reliability
• Voltages measurements for load, charger & battery pack
• Bi-directional current monitoring
• SOC based on coulomb counting
• Humidity sensor & board temperature monitoring
• Charger detection circuit
• Integrated precharge circuit
• Power button, USB-C, UART, I2C & isolated CAN bus interface
• On board High-Efficiency 3.3V regulator powered from the main battery pack
• High current capacity automotive grade screw connectors for main power connections
• Buzzer & status LED
• Support overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
• Support almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.

 Video:

Firmware & software repositories are available click here:Github page.

Spec:

• Cell voltage operating range:2V-5V
• Recommended series cell:18S-24S
• Charge Voltage:48V-104V
• Charge Current：≤10A
• Abs. Max battery voltage: 120V
• Minimum operating voltage: 28V
• Continuous charging current: 10A
• Over charge detect and release voltage: 2V-5V
• Over charge protection delay: ≥4ms
• Discharge current: ≤70A
• Max. Continuous discharge / regen current: 70A
• Discharge voltage:48V-104V
• Over discharge detect and release voltage: 0-5V
• Over current detect delay:≥4ms
• Discharge over current protection release condition: off load
• Short Circuit detect voltage:short circuit of external load
• Short Circuit detect delay: 320us
• Short Circuit protection release: off load
• Battery pack capacity and internal resistance detection: Yes
• Balance current: 50mA @4.2V
• Temp Protect: -20℃—+120℃
• Working Temp Range:-20℃—+80℃
• Storage Temp Range: -20℃—+100℃
• Working current: ≤40mA
• Sleeping current: ≤100uA
• Size: 109 x 40mm
• Net weight: 126.7g
• Packing size: 140 x110 x 50 mm
• Package weight: 370.3g
• Including outer carton size: 170*120*100mm
• Weight with outer carton: 420g

Feature:

• Compact layout and mini
• Using aluminum alloy material shell, better heat dissipation.
• Automotive grade design, automotive grade locking connector.
• Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL.
• Automotive grade monitoring & balancing IC with separate power supply for increased reliability
• Voltages measurements for load, charger & battery pack
• Bi-directional current monitoring
• SOC based on coulomb counting
• Humidity sensor & board temperature monitoring
• Charger detection circuit
• Integrated precharge circuit
• Power button, USB-C, UART, I2C & isolated CAN bus interface
• On board High-Efficiency 3.3V regulator powered from the main battery pack
• High current capacity automotive grade screw connectors for main power connections
• Buzzer & status LED
• Support overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance).
• Support almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc.

Video:

Specs:

• Recommended nickel strips: 0.1-0.2mm
• Menu display: 1.8 inch color LCD
• Working mode: automatic/manual
• Built-in battery: 10000mAh
• Shell material: aluminum alloy
• Thickness of soldering pen wire: 8AWG
• Cycle charging: support
• Protection reminder: support
• Firmware upgrade: support
• Automatic shutdown: support
• Power display: support
• Temperature detection: support

This is a skate tool with a hidden hex/phillips-head screwdriver built inside. You can tighten up any loose parts or fix your skateboard on-the-go! 

Includes:
T tool comes with a hex head in 3 sizes: H9.5, H13, or H14.

Spec:

• Model: SQ-A110
• Max Power:110W
• Temperature range: 100-500 ° C (212-932 ° F)
• Power supply: 220V 50Hz / 110V 60Hz
• Grounding impedance of welding nozzle: < 2 Ω
• Ground voltage of welding nozzle: < 2mv
• Dimension (about): 236mm (length) x 23.6mm (maximum diameter) / 9.29in (length) x 0.93in (maximum diameter)

The advantage of the SQ-A110

• Small size, three key design, powerful function.
• Fast temperature recovery, heating speed 8 seconds.
• High quality heating body, high platinum temperature sensitivity.
• Two display temperature modes (Celsius, Fahrenheit).
• With sleep function to save energy and LED indicate sleep state.
• Microcomputer temperature compensation value, temperature error less than plus or minus 5 degrees.
• High insulation, soft touch power cord.
• Digital display, clear content at a glance.
• Memory mode function.
• Handle is made of special high temperature resistant material and ESD anti-static treatment.
• Equipped with black diamond solder tip, it has strong tin loading capacity and fast heat transfer speed.

Package included:

• Model name: SQ-001

• Color: Black, Blue
• Power output：65W
• Temperature range: 100-400 °C / 212-752°F
• Factory default temperature:  300  °C / 572°F
• Power supply: DC 12-24V  5.5 * 2.5mm standard interface

Preset temperature                            300℃(Initial setup)

Power saving temperature                 200℃(Initial setup)  

Operating voltage     Power                The fastest time to heat up

                                                                     (from30℃-300℃)      

        12V                   17W                       40s

        16V                   30W                       20s

        19V                   40W                       15s

        24V                   65W                       11s

• Universal interface expand the scope of application
• Super Light weight  & mini size (with iron tips assembled):  31g / 172mm
• Multiple choice of power supply

The Advantage of Upgraded Version SQ-001

1. MINI SQ-001 Electric soldering iron is an upgraded version of internal heat intelligent numerical control soldering iron. Lightweight design, easy to install and use, easy to remove and store, comfortable control handle, high-efficiency heating end, simple control interface. It is a favorite tool for electronic engineers and electronic maintenance enthusiasts.
2. It can work in DC 12-24V, OLED screen display, key temperature adjustment, external independent power supply. In DC 19V 40W state, 15 seconds temperature rise to 300 ℃.
3. SQ-001 intelligent temperature control between 100-400 degrees, more stable temperature, instantaneous temperature rise, automatic sleep, over temperature alarm and other functions
4. The heating end adopts internal heating core
5. Temperature stability range: ± 2%
6. External independent power supply: DC 5525 power interface, suitable for DC 12-24v notebook power supply, vehicle power supply and mobile power supply.
7. Micro USB interface: set temperature rise curve, user defined function key and firmware upgrade function through parameter file.
8. Additional functions: application layer open source design. You can change the internal parameter settings according to your own needs to meet more and more performance needs of different customers.

 Package includes :

Reference information: 

Important Tips:

Function Introduction: