CloudWheel 100% Replacement Guarantee Three months
if the wheel core breaks under normal use!
- 120mm Diameter electric skateboard urban all terrain soft foam filling wheel
- High-quality pu material, suitable for belt motors and other systems (not suitable for wheel hub motors)
- High elastic foam material is added to the wheels, which are evenly distributed, cushioning and absorbing shocks, satisfying various road traffic in the city! Mounts on Many Eboards and Longboards.
- Cast with 78A super-high-rebound urethane for unparalleled speed.
4pcs All terrain wheel( same color)
8pcs 8mm bearings
Remark: Alcohol is corrosive, please do not use alcohol to clean or wipe
- Hardware: V2.2
- Max voltage: 13S (60V)
- Continuous Current: 150A , Max Current: 200A
- Mosfets: NVMFS5C628NLs
- LED button diameter:12mm, cable length: 250mm
- PCB thickness:4 layers*3oz copper=12oz copper
- PCB size: 40mm*32m
- High Side Switching -> Much safer to use with multiple ESCs and other devices.
- In-rush current limiting.
- RC delay network restricts inrush current to safe levels.
- dV/dt is ~100V/s (This is considered VERY slow for power electronics. Fast would be 50,000,000V/s). At 6,000 uF output capacitance, this is an inrush current of 600mA.
- Smart Power on/off
- Roll-to-start. Has 12 second blanking timer after turn off. Can still be turned on by switch during this period.
- Auto-turn-off. Will turn off automatically after 20 minutes. The output voltage must vary by at least 500mV within any three second interval to reset the turn-off timer.
- Support momentary push button. Hold for 0.3s to turn on, 1s to turn off. Holding it down will cycle it on then off.
- High power, 150A Continuous.
- Very low idle power draw, ~300uA, will last months on battery.
1.Preventing a small spark may cause explosions in some spark-sensitive areas.
2. Add copper bars for better heat dissipation and over-current flow.
3.Anodized aluminum Heatsink with lots of notches for better heat dissipation.
4.Add silicon glue to fix the LED button cable with the heat shrink.
- Do not peel off the heat shrink.There’s no screw to lock the heatsink and PCBA. Only the heat-transfer silicon pad is naturally sticky to heatsink and PCBA.
- No short circuit protection, DO NOT short circuit output!
- No reverse polarity protection. DO NOT plug in backwards.
- Recommended to keep output capacitance under 6,000 uF. Proper operation cannot be guaranteed at higher capacitances.
- Do not Hot-Swap. Try to make sure everything is off before connecting and removing. If need be, unplug from battery first, wait for ESCs to turn off, then unplug ESCs. Do the reverse for plugging in, plug in ESCs first before plugging the switch into the battery.
- Engineers have thoroughly tested prototypes; however, this is still a new design and a first production run, please exercise extreme caution (as one would normally do with any electric vehicle) when using this device.
- Do not attempt to reprogram the MCU unless otherwise advised. Doing so will void any warranty and also put the switch at great risk of failure.
Remark: 13.78 inches truck will have stock on next month
Double kingpin trucks increase carving possibilities Constructed from high-quality aluminum matrial, made by gravity casting technology, trucks are after heat treatment, very strong .
What is advantage of gravity casting technology？
- Aluminum liquid flow into truck mould by liquid's weight naturally, this way can delete mould's inside air clearly.
- can do heat treatment after demoulding.
- Aluminum hardness reached out HRB65 around .
- can stand over 150kg weight.
Detail size of 12 Inches Trucks(recommended motor:6354 motor/Flipsky 10mm D-shaft 6374(99mm length）motors）
Detail size of 13.78 Inches Trucks(recommended motor: Flipsky 8mm 6374 /6384motors)
Applicable Model: MAX G30,Suitable for VESC series ESC ADC control
Socket :ZH1.5 MM 3P Female
- Type: Deep groove ball bearings
- Rolling Block material: Bearing steel
- Size : (Inner diameter /outer diameter/thickness)-10*28*8mm
| Suitable for 8'' Pneumatic All Terrain Tire Kit with 11'' truck
Deep groove ball bearings mainly take radial load, but also can support radial and axial load. When the only radial loads, the contact angle is zero.
When the deep groove ball bearings with a larger radial clearance, with angular contact bearings can bear large axial load, deep groove ball bearing friction coefficient is small, the speed limit is also high.
1x Deep groove ball bearing