ESC

• ESC model:75100 prov2.0
• Maximum discharge current: Maximum continuous 100A
• Voltage Range: 6-20s (25.2*84v)
• Heat dissipation method: water cooling (water pipe outer diameter 8MM, inner diameter 3MM)
• Support control protocols ppm, uart, adc, nrf, pas

7070 motor parameters

• Motor :7070/110KV
• Waterproof grade :IP58
• Guard material :ABS
• Fixing bracket:6061 aluminum alloy
• Propeller: 3 pcs propeller 3.8 inches
• Voltage range 6-20s (25.4-84v)
• Rated power 2200w
• Maximum power: 4300W

Remote control

• remote control:vx3pro
• Control mode :UART
• Remote control distance: no interference, 25 meters in a straight line
• Waterproof grade:Ip67
• There are 3 adjustable gears (L/M/H)
• Functions: Cruise control, GPS speed display, infinite throttle

Inflatable Fishing Boat With Electric Motor Size：

7070 electric fin motor drawing：

7070 Electric fin thruster drawing:

Spec:

• Processor:STM32G071
• Firmware:BLHeli_32
• Working Voltage:2-8S Lipos (8.4V-33.6V)
• Continuous / Peak Current :70A / 150A
• PWM Frequency:16KHz-128KHz
• Input Set Support:Dshot 600/300/150, PWM, Oneshot, Multishot;
  Telemetry Return :Support real-time data like motor RPM, temperature, current etc. available.
• Galvanometer:Yes
• BEC :No
• Mounting Hole Spacing:20x20mm, Φ4mm/M3
• Product Size:50.5*36*6mm(L*W*H)
• Product Weight:15.8g

Features:

1)The esc is built with galvanometer supporting telemetry return, thus real time data like motor RPM, temperature, current etc. available.
2)High quality 8504mosfets with good heat dissipation and high efficiency conversion, which extending the flight time with long lifespan. 
3)Multiple 8 layers PCB design with good heat dissipation and over-current capacity. 
4)Excellent precise control of interval time switch enables high speed response and smooth control.
5)No worries of out-of-step problem with wide PWM frequency 16KHz-128KHz and excellent circuit design.
6)Compacted structure design with mounting holes suitable for easy mounting and suitable for various types of racks.

flipsky_esc_tool  software and manual download link

Spec:

• Firmware: V1.3 or above (firmware update via Flipsky ESC Tool supported)
• Voltage: 14V-84V (safe for 4S-20S)
• Continuous current: 50V/550A; 75V/450A (Values depend on the mounting, ambient temperature
• and air/water circulation around the device!);
• Peak Current: 1000A
• BEC:5V@1A
• Motor/power Wire Size:8 AWG (3pcs combine)
• Programmable Tool: Flipsky ESC TOOL
• PWM Frequency Control: YES
• Multiple Speed Gear Limit Control:YES (UART / ADC)
• Regenerative Capacity: Yes
• Communication Ports: USB, CAN, UART, PPM, ADC
• Input Signal Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro
• only at present, it will be compatible with more remote controllers soon)
• Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored)
• Multiple Speed Gear levels: Low, Medium, High, Reverse
• Switch Support: Power on/off button switch or key switch
• Size: L227.5*W140*H54mm(with water cooling enclosure)

Features:

1. Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed.
2. 240MHz and the max PWM switching frequency 45KHz, which improves the motor RPM.
3. Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different
4. batteries voltages and many control ways.
5. Programmable via Flipsky VX4 remote (Firmware Version:VX4_V1.2.1or above)
6. Supporting FOC with low working noise and smooth starting.
7. Supporting Real-time data and fault alerts.
8. Supporting adaptive variable PWM frequency control.
9. Supporting sensor mode(HALL) and sensorless modes (IPDS, HFPI).
10. Supporting control types: Current, Duty Cycle.
11. Protection functions: low and high voltage protection, motor over-temperature protection (suitable
12. for NTC-10K-25℃ temperature sensing resistance only), battery over discharge protecting,
13. mosfets over current and over-temperature protection.

Spec:

• Size: ∅ 65*150mm
• KV:160KV
• Voltage range: 4-13S
• Rated current: 30A;Maximum current:70A
• Insulation current:AC500v/1ma/3s
• Rated power:1500W;Maximum power:3000W
• Rated torque:2.3N.m;Maximum torque 4.5N.m
• Internal structure:12N/10p
• ESC drive mode:PPM
• Communication port: USB
• ESC driver firmware:5.2 vesc tool 3.00
• ESC support mode: BLDC/FOC
• Shaft specifications ∅ 12-0.005/-0.01
• Power cable: 2*12AWG(∅ 4.5mm*140)
• Power plug: XT90 male
• Weight:2.0kg

Spec:

• Model:FSESC 28120
• Processor:STM32G071
• Input voltage :DC 7V-33.6V（2-8S Lipos）
• Continuous current:120A
• Maximum current:150A
• Firmware:BLHeli_32 / AM32
• RGB LED Choices :Yes
• Cable Size:14AWG
• Programmable：Yes. Available for throttle calibration, timing angle setting, current detection, telemetry signal, motor rotation direction etc.